Instructions

~ 60 ~
❖ Do not use any alkaline dishwasher-detergents! (pH more than 7).
CLEANING INTERVAL FOR ALUMINIUM GREASE FILTERS
➢ Every 2 - 3 weeks according to the frequency of use of the extractor hood.
MANUAL CLEANING OF THE ALUMINIUM GREASE FILTERS
1. Soak the aluminium grease filters in warm rinse water (up to 30 °C)
2. Then clean the grease filters with a soft brush. Be careful not to damage the grid
of the grease filters.
3. After cleaning: Rinse the grease filters thoroughly using hot water.
4. Repeat this process in case of stubborn soiling or deposits.
5. Dry the filters properly before you reinstall them.
CLEANING OF THE ALUMINIUM GREASE FILTERS IN THE DISHWASHER
❖ The grease filters can also be cleaned in the dishwasher: Normal programme (up
to 30 °C)
Do not put the filters in the dishwasher together with tableware. Dry the filters
properly before you reinstall them.
NOTICE! Filters which are blocked with food leftovers are not
covered by the guarantee.
6.2 Carbon filters
WARNING! Switch off the appliance and disconnect it from the mains
before you install any carbon filters (use the relevant fuse in your
household fuse box).
CARBON FILTERS for your extractor hood are optional available.
❖ Conventional carbon filters cannot be cleaned.
❖ The capacity of these filters is limited. You can use such filters for about 3 - 6
months approx.
❖ Replace used filters immediately. Find further information on the filter packaging.