Instructions

~ 63 ~
7. Troubleshooting
MALFUNCTION
POSSIBLE CAUSE
MEASURE
THE APPLIANCE DOES NOT WORK AT ALL.
1. The plug of the appliance is not
connected to the socket.
1. Connect the appliance to the mains
properly.
2. The plug has become loose.
2. Check the plug.
3. The socket is not supplied with
energy.
3. Check the corresponding socket by
connecting it with another appliance.
4. The fuse is switched off.
4. Check the fuse box.
5. The voltage is too low.
5. Compare the data on the model plate
with the data of your energy supplier.
LIGHT IS ON BUT MOTOR DOES NOT WORK.
1. Ventilation damper blocked.
1. Remove blockage.
2. Motor mounting defective.
2. Replace motor.
ABNORMAL MOTOR-SMELLS.
1. Motor defective.
1. Replace motor.
SMEAR OF OIL.
1. One-way valve is leaky.
1. Seal the valve.
APPLIANCE VIBRATES.
1. Motor not properly fixed.
1. Fix motor properly.
2. Hood not properly fixed.
2. Fix hood properly.
INSUFFICIENT EXTRACTING CAPACITY.
1. Too much distance hood-hob.
1. Lower position of hood.
2. Too much draught because of open
doors and/or windows.
2. Close the doors/windows.
APPLIANCE IS UNSTABLE.
1. Screws are not firmly tightened.
1. Tighten the screws.
2. The mounting bracket / mounting
plate is not fixed firmly.
2. Fix the mounting bracket /
mounting plate properly.