Instructions

38
8. Fix the upper chimney by tightening the screws.
9. Insert the aluminium filter and plug in the appliance.
10. If the socket is covered by the chimney, you must plug in the appliance at an
earlier point in time. In such a case, the relevant socket must be equipped with a
disconnecting device. All required work to install such a disconnecting device
must be carried out by a qualified professional.
➢ Check from all sides that the appliance is aligned horizontally; otherwise the
appliance will not work properly.
2.4 Carbon filter
Product code: CF 110.
WARNING! Unplug the appliance or disconnect it from the mains (use
the relevant fuse in your household fuse box).
WARNING! Use the carbon filters in recirculation mode only.
1. Remove the grease filter(s). The carbon filters are intended to be installed on both
sides of the motor.
2. Please note the following illustration: