Instructions

39
CARBON FILTER (installed)
BRACKET (holding mechanism
on the motor)
L
TURN TO THE LEFT = Remove a previously installed carbon filter.
R
TURN TO THE RIGHT = Place the carbon filter on the motor and turn the
filter to the left slightly or jerk it carefully until the filter is installed properly.
M
MOTOR
3. Match the brackets of the filter with the holding mechanism of the motor and
jerk carefully until the filter locks.
FILTER-BRACKETS
HOLDING MECHANISM/MOTOR
4. Install the grease filter(s).
NOTICE! Depending on frequency of use, replace the carbon filters every
three to six months. Clean the grease filter(s) regularly for proper operation
of the motor.
You can order the carbon filter at
www.pkm-online.de!
Type name of the carbon filter: s. chapter TECHNICAL DATA