LB2650W USER’S GUIDE www.planar.
The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be reproduced, translated to another language or stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission. Windows is a registered trademark of Microsoft, Inc.
Table of Contents Usage Notice Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Introduction About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Package Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Installation & Dimensional Drawings Product Overview . . . . .
Usage Notice WARNING – To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. WARNING – Please do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. Do: ❑ Turn off the product before cleaning.
Introduction About Planar’s LB2650W The LB2650W products all have a 26" diagonal flat panel screen with an active matrix, thin-film transistor (TFT) liquid crystal display (LCD). Features include: ❑ Dual signal input: Analog VGA and Digital DVI (future models will also include an additional DVI port). ❑ Active matrix TFT LCD technology ❑ 1920 x 1200 WUXGA resolution ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 5 ms GTG response time 26" viewable display area 31 ~ 93 kHz horizontal scan 50 ~ 76 Hz vertical refresh rate 0.
Package Overview LCD Display VGA Signal Cable Quick Start Guide HDMI to DVI Signal Cables North American Power Cord Extension Power Cable (Please order p/n 903-0467-00 for European style cord) 6 LB2650W User’s Guide 020097300 Rev.
Installation & Dimensional Drawings Product Overview ; 72 &(17(5 2) 02817,1* 6/27 %(=(/ 23(1,1* $&7,9( $5($ ; &/ ; 72 &(17(5 2) 02817,1* 6/27 PP ',$*12/ &/ %(=(/ 23(1,1* $&7,9( $5($ % 2876,'( 2) 02817,1* %5$&.(7 )/$1*(6 216& 216&5((1 &21752/ %877216 '6 2) (1'6 2) $'(' 7+5($'(' 8'6 2876,'( 2) 678'6 02817,1* %5$&.
Connecting the display (Figure 1.1) To set up this display, please refer to the following figure and procedures. 1. Be sure all equipment is off. 2. Connect the AC power cord to the power connector. Plug the other end into an electrical outlet(1). 3. For the PC with Analog graphics output: connect the VGA signal cable from display VGA input connector to the 15-pin connector of your host computer and tighten the screws(2). 4. For DVI or HDMI output: connect DVI cable from display to the PC. 5.
Figure 1.1 Ext. Power Cord (on future models) VGA-VGA DVI-HDMI DVI-DVI (on future models) LB2650W User’s Guide 020097300 Rev.
User Controls Front Panel Controls A brief description and the location of all LCD Monitor functions controls and indicators. Power Button Push to turn ON or turn Off. LED Indicator Green when the monitor is on, Amber when in power saving mode, and Dark when off. Cursor Button A four direction key plus enter/exit button. Allows you to move up, down, left, right or pressed. See function chart below. Menu Button Activates OSD main menu. Exit Button Exit OSD display / DV mode hot key.
How to Use the OSD Menus 1. Press the “Menu” button to pop up the on-screen menu and to select between the four main menus. 2. Choose the adjustment items by pressing the “Select/Auto” button. 3. Adjust the value of the adjustment items by pressing the “ ” button. 4. The OSD menu will automatically close, if you have left it idle for a pre-set amount of time. LB2650W User’s Guide 020097300 Rev.
Adjusting the Monitor’s Display The monitor has four function control buttons to select among functions shown of OSD menu, designed for easy user-viewing environments. OSD Function Menu To activate the OSD Main menu, simply press ”Menu” button , the menu diagram will pop up on the screen as shown on Fig. 2-2 Use the 4D+1 key to navigate through the function you want to adjust. Push the 4D+1 key to enter a sub-menu and adjust the value. Push the 4D+1 key again to exit the sub-menu.
Function Description Figure Function Function Description DV MODE BRIGHTNESS CONTRAST SHARPNESS The following DV mode display setting can be selected by OSD (STANDARD/TEXT/sRGB/MOVIE/GAMING/PHOTO) Default setting: TEXT Adjust the brightness. Factory setting: 100.0% Adjust the image contrast. Factory setting:50.0% Adjust the sharpness. Factory setting: 50% AUTO CONTRAST Adjust the CONTRAST to the optimal value for the (D-SUB or DVI-I video-input level automatically.
Only) Choose different color temperature (9300K, 7500K, sRGB, USER). Color Temperature Default is USER. USER mode adjustable. Adjust the contrast and brightness of each color of the white balance. RED GREEN BLUE GAIN Allows you to adjust the Red/Green/Blue color gain. RED GREEN BLUE OFFSET Allows you to adjust the Red/Green/Blue color offset. SATURATION DDC/CI Adjust color depth, increasing this value makes pictures more colorful, decreasing makes pictures less colorful.
RESOLUTION NOTIFIER Resolution notifier activity. Factory setting: OFF Information Provide information about resolution, H/V frequencies, and polarity of the input signal. Input Select This OSD informs the user the current signal that is displayed. This OSD will automatically turn off after 2 seconds or by pressing the “Exit” key. This OSD gives a warning when the selected input OSD Warnings signal is not active. After power on or when the input signal become inactive, this warning appears.
change to power saving mode. If direction key is pressed during power saving mode, this warning OSD is opened again. This function gives warning about input resolution or OSD Warnings refresh rate that the monitor cannot display. If video signal is not at the proper timing when the OUT OF RANGE monitor powers on or input signal is changed, this message opens and it disappears after 45 seconds, or by "EXIT" key.
OSD Lock Out Function The OSD Lock Function allows you to lock out the OSD menu and the button keys. To activates the OSD lock function, the monitor must be in a normal display mode and the information menu as shown in fig-2-4 must be activated. Then follow the instructions below. Figure 2-4 Option 1: OSD lock – all buttons be locked except the “POWER” button.
Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or visit Planar Support at www.planar.com/support. See support contact information on rear cover. PROBLEM: Picture is unclear and unstable. The picture is unclear and unstable, please perform the following steps: 1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment. 2.
Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing.
1152x864 (75Hz) 1152x870 (75Hz) 1280x720 (60Hz) 1280x960 (60Hz) 1280x960 (70Hz) 1280x960 (75Hz) 1280x1024 VESA-1024-60Hz 1280x1024 VESA-1024-75Hz 1360x768 60Hz 1440x900 Red. BLKing 60Hz 1440x900 60Hz 1440x900 75Hz 1680x1050 Red. BLKing 60Hz 1680x1050 60Hz 1680x1050 75Hz 1600x1200 VESA-1200-60Hz 1600x1200 VESA-1200-70Hz 1600x1200 VESA-1200-75Hz 1920x1200 Red. BLKing 60Hz 1920x1200 60Hz 67.5 75 68.68 75.06 44.772 59.855 60 60 70 70 75 75 64 60 80 75 75 75 55.469 59.901 55.935 59.887 70.635 74.984 64.674 59.
Support and Service Planar is a US company based in Beaverton, Oregon and Espoo, Finland with a worldwide sales distribution network. Visit Planar at http://www.planar.com/support for product registration, operations manuals, line drawings, touch screen drivers, warranty information and access to Planar’s Technical Library for online troubleshooting.
Planar Systems, Inc. Customer Service 24x7 Online Technical Support: http://www.planar.com/support Americas Support Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-1100 Hours: M-F, 8am - 8pm Eastern Time | M-F, 5am - 5pm Pacific Time Europe and Asia-Pacific Support Tel: +358-9-420-01 Hours: M-F, 7:00am - 4pm CET © 2009 Planar Systems, Inc. 03/09 Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners.
