PL1711M
Planar Systems, Inc 1195 NW Compton Drive Beaverton, OR 97006-1992 www.planar.com Customer Service Planar provides the following technical support services: Internet Support For support available 24/7 visit Planar's Online Technical Support at www.planar.com/support. Our Online Technical Support is where you'll find solutions to many common problems, download documentation, view answers to frequently asked questions (FAQs) and get troubleshooting advice, or email Planar your support question.
Table of Contents Table of Contents...............................................................................................................1 Preface ...............................................................................................................................2 Chapter 1 Installation........................................................................................................4 Unpacking .........................................................................................
Preface This manual is designed to assist users in setting up and using the PL1711M LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved.
Important Safety Instructions Please read the following instructions carefully. This manual should be retained for future use. 1. To clean LCD Monitor screen; -- Power off LCD Monitor and unplug the AC Cord. -- Spray a non-solvent cleaning solution onto a rag. -- Gently clean the screen with dampened rag. 2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can severely damage it. 3. Do not apply pressure to the LCD screen.
Chapter 1 Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot.
Height Adjustment Stand To unlock the height adjustment feature of the stand, locate the pin on the back of the stand column and turn the pin knob counter-clockwise. (See fig.1-1 ) Figure 1-1 Tilt, Swivel and Pivot Rotation The LCD Monitor is designed to have a tilt range of -5°to +25°, a swivel range of -35°to +35°, and a 90° pivot rotation. (See fig. 1-2) Figure 1-2 Warning Do not force the LCD Monitor over its maximum viewing angle settings as stated above.
Power Management System This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal. When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will light yellow. Optional Mounting Alternatives Warning: The monitor stand base may forcefully extend and cause injury. position before removing the monitor stand.
Chapter 2 Display Controls User Controls A brief description and the location of all LCD Monitor function controls and indicators: 8 Figure 2-1 1 2 3 4 5 6 7 8 Stereo Speakers Speaker Volume Control DC Power Switch DC Power-On Indicator Function Select Buttons Adjustment Control Buttons External Headphone Jack Input Select PC Audio Stereo output. Increase Volume - Turn knob clockwise. Decrease Volume - Turn knob counter clockwise Press the power switch to switch the monitor ON/OFF.
Function Description Icon Function Function Description Brightness Contrast 101 scales of brightness are available to choose from (0 to 100). 101 scales of contrast are available to choose from (0 to 100). H. Position This function let's you adjust the display's horizontal position This function let's you adjust the display's vertical position. This function let's you select the images sharpness. Five selections are available.
Notice: “OSD Lock Out” Function: When monitor is in normal display, you can enable the “OSD Lock Out” function. * How to enter “OSD Lock Out” function => Step 1: The monitor is displaying after power on. Step 2: To press the buttons “VOL –“ and “VOL+” and “Function >” at the same time for 3 seconds or more. Step 3: Monitor will show an “OSD Lock Out” message for 5~10 seconds and the message will disappear automatically.
Chapter 3 Technical Information Specifications LCD Panel Size Display Type Resolution Display Dot Display Color PL1711M 17" (43.2 cm) Active matrix color TFT LCD 1280 x 1024 1280 x (RGB) x 1024 16.2M (RGB 6 bit+FRC). Video Input Signal Input Impedance Polarity Amplitude Control Power switch Audio (PL1711M only) Input Output Analog RGB 0.7Vp-p/ Digital TMDS 75 Ohm ± 2% Positive, Negative 0 - 0.7 ± 0.
Sync Input Signal Polarity Plug & Play External Connection Power Input (AC input) Video Cable Audio Cable Environment Operating Condition: Storage Condition: Separate TTL compatible horizontal and vertical synchronization Positive and negative Supports VESA DDC2B functions AC socket 15-pin D-sub connector Stereo Jack Temperature Relative Humidity Temperature Relative Humidity 5°C to 40°C/41°F to 104°F 20% to 80% -20°C to 60° C/-4°F to140° F 5% to 85% Power Supply (AC Input) Input Voltage Input Current
Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. TIMING FH(KHZ SYNC TOTAL ACTIVE SYNC FRONT BACK PIXEL ) FV(HZ) POLARITY (DOT/ WIDTH PORCH PORCH (DOT/ FOREQ LINE) LINE) (DOT/LINE) (DOT/LINE) (DOT/LINE) (MHZ) 640x350 31.469 + 800 640 96 16 48 25.175 VGA-350 70.087 – 449 350 2 37 60 640x400 24.83 – 848 640 64 64 80 21.05 NEC PC9801 56.42 – 440 400 8 7 25 640x400 31.469 – 800 640 96 16 48 25.175 VGA-GRAPH 70.
Troubleshooting This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA card is selected. Attention This LCD Monitor Supports Multiple VGA Modes. Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.
Planar Systems, Inc. 1195 NW Compton Drive Beaverton, OR 97006-1992 www.planar.com © 2006 Planar Systems, Inc. Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. Technical information in this document is subject to change without notice.