PL1911M
Planar Systems, Inc 1195 NW Compton Drive Beaverton, OR 97006-1992 www.planar.com Customer Service Planar provides the following technical support services: Internet Support For support available 24/7 visit Planar's Online Technical Support at www.planar.com/support. Our Online Technical Support is where you'll find solutions to many common problems, download documentation, view answers to frequently asked questions (FAQs) and get troubleshooting advice, or email Planar your support question.
Table of Contents Table of Contents...............................................................................................................1 Preface ...............................................................................................................................2 Chapter 1 Installation........................................................................................................4 Unpacking .........................................................................................
Preface This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved.
Important Safety Instructions Please read the following instructions carefully. This manual should be retained for future use. 1. To clean LCD Monitor screen; -- Power off LCD Monitor and unplug the AC Cord. -- Spray a non-solvent cleaning solution onto a rag. -- Gently clean the screen with dampened rag. 2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can severely damage it. 3. Do not apply pressure to the LCD screen.
Chapter 1 Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot.
Height Adjustment Stand To unlock the height adjustment feature of the stand, locate the pin on the back of the stand column and turn the pin knob counter-clockwise. (See fig.1-1 ) Figure 1-1 Tilt, Swivel and Pivot Rotation The LCD Monitor is designed to have a tilt range of -5°to +25°, a swivel range of -35°to +35°, and a 90° pivot rotation. (See fig. 1-2) Figure 1-2 Warning: Do not force the LCD Monitor over its maximum viewing angle settings as stated above.
Connecting the Display to your Computer 1. Power off your computer. 2. Connect one end of the signal cable to the LCD Monitor’s VGA port or DVI port.(See Fig 1-5) 3. Connect the other end of the signal cable to the VGA port or DVI port on your PC. 4. Make sure connections are secure. Figure 1-5 Connecting the AC Power 1. Connect the power cord to the LCD Monitor. (See Fig. 1-6) 2. Connect the power cord to an AC power source. Figure 1-6 Connecting the Audio Cable 1.
Chapter 2 Display Controls User Controls A brief description and the location of all LCD Monitor functions control and indicator: 8 Figure 2-1 1 Stereo Speakers PC Audio Stereo output. 2 Speaker Volume Control Increase Volume - Turn the knob clock wise. Decrease Volume - Turn the knob counter clock wise. 3 Soft Power Switch Press the soft power switch to switch the monitor ON/OFF. 4 Power-On Indicator LED lights Green color --- Power is ON.
Function Description Icon Function Brightness Contrast Function Description 101 scales of brightness are available to choose from (0 to 100). 101 scales of contrast are available to choose from (0 to 100). This function let's you adjust the display's horizontal position. (Digital Input Mode not support.) This function let's you adjust the display's vertical position. (Digital Input Mode V. Position not support.) This function let's you select the images sharpness. Five selections are available.
Notice: “OSD Lock Out” Function: When monitor is in normal display, you can enable the “OSD Lock Out” function. * How to enter “OSD Lock Out” function => Step 1: The monitor is displaying after power on. Step 2: To press the buttons “VOL –“ and “VOL+” and “Function >” at the same time for 3 seconds or more. Step 3: Monitor will show an “OSD Lock Out” message for 5~10 seconds and the message will disappear automatically.
Chapter 3 Technical Information Specifications LCD Panel PL1911M Size Display Type Resolution Display Dot Display Color 19" (48 cm) Active matrix color TFT LCD 1280 x 1024 1280 x (RGB) x 1024 16.2M (RGB 6bit +FRC) Video Analog RGB 0.7Vp-p 75 Ohm ± 2% Positive, Negative 0 - 0.7 ± 0.
Sync Input Signal Polarity Plug & Play External Connection Power Input (AC input) Video Cable Audio Cable Environment Operating Condition: Storage Condition: Power Supply (AC Input) Input Voltage Input Current Separate TTL compatible horizontal and vertical synchronization Digital TMDS Positive and negative Supports VESA DDC2B functions Power cord 15-pin D-sub connector, 24-pin DVI-D Stereo Jack Temperature Relative Humidity Temperature Relative Humidity 5°C to 40°C/41°F to 104°F 20% to 80% -20°C to 6
Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing.
Troubleshooting This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA card is selected. Attention This LCD Monitor Supports Multiple VGA Modes. Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.
Planar Systems, Inc. 1195 NW Compton Drive Beaverton, OR 97006-1992 www.planar.com © 2006 Planar Systems, Inc. Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. Technical information in this document is subject to change without notice.
