PLL1900MW LED Monitor USER'S GUIDE www.planar.
Content Operation Instructions...................................................................................................................................................1 Safety Precautions ...........................................................................................................................................................2 First Setup..................................................................................................................................................
Operation Instructions Thank you for purchasing this LED Monitor, a high-resolution multi-scan color LED Monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation.
Safety Precautions This LED Monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the LED Monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS: This LED Monitor should be operated only at the correct power sources indicated on the label on the rear end of the LED Monitor.
First Setup Congratulations on your purchase of this high performance LED monitor. This LED Monitor comes with the following accessories : LED Monitor Power Cable User’s Guide Audio Cable VGA Cable Installing the Stand Base 1. Place the monitor face down on a soft cloth or cushion on a table. 2. Install the stand base to the monitor. Disconnecting the Stand Base 1. Place the monitor face down on a soft cloth or cushion on a table. 2.
Front View of the Product OSD Menu On/Off Volume Adjust/Scroll Down/Adjust Decrease Preset Mode/Scroll Up/ Adjust Increase Confirm Select/ Auto adjust Power ON/OFF LED Indicator 4
Rear View of the Product Power input (AC input) Audio Input VGA input (D-Sub 15 pin) 5
Quick Installation 1. Connect Video cable (VGA cable) Make sure both monitor and computer are powered OFF. Connect the video cable (VGA cable) to the computer, then to the monitor. 2. Connect Power cord Connect the power cord to a properly grounded AC outlet, then to the monitor. 3. Connect Audio cable Connect the Audio cable from Audio output of computer to the Audio input of the monitor. 4. Power-ON computer and monitor Power-ON the computer, then Power-ON the monitor. 5.
Basic Operation Before using the LED Monitor: Connect external equipments properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED Monitor on/off: Press POWER button on the front of LED Monitor. The power LED indicator lights green when the LED Monitor is on. Using the OSD Menu You are able to use OSD menus to adjust various settings by using menu button on the front of the LED Monitor.
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons. The LED Monitor will show an “Lock Out” message for 5~10 seconds and the message will disappear automatically. Repeat this step to unlock.
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED Monitor. Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast: To adjust the foreground white level of screen image. ▲: increase contrast, ▼: decrease contrast.
6500K: Adds red to screen image for warmer white and richer red. 5400K: Adds green to screen image for a darker color. User Color: Individual adjustments for red (R), green (G), blue (B). 1. Press button 2 to select the desired color. 2. Press ▼ or ▲ button to adjust selected color. Information: To display the information, regarding the current input signal coming from the graphic card in your computer.
OSD Position: Press ▼ or ▲ button to select between horizontal and vertical OSD Position adjustment. H. Position: To horizontally adjust the OSD position. ▲: move OSD to the right, ▼: move OSD to the left. V. Position: To vertically adjust the OSD position. ▲: move OSD up, ▼: move OSD down. OSD Time Out: To automatically turn off On Screen Display (OSD) after a preset period of time. OSD Background: Allows the user to turn the OSD background On or Off.
Supporting Timing Modes STANDARD VGA VGA MAC VESA VESA VESA VESA VESA VESA MAC VESA VESA VESA MAC VESA RESOLUTION 720 x 400 @ 70Hz 640 x 480 @ 60Hz 640 x 480 @ 67Hz 640 x 480 @ 72Hz 640 x 480 @ 75Hz 800 x 600 @ 56Hz 800 x 600 @ 60Hz 800 x 600 @ 72Hz 800 x 600 @ 75Hz 832 x 624 @ 75Hz 1024 x 768 @ 60Hz 1024 x 768 @ 70Hz 1024 x 768 @ 75Hz 1152 x 870 @ 75Hz 1366 x 768 @ 60Hz Note: Simultaneously press 1 and 2 keys on monitor panel to switch between similar PC timings.
Technical Information Technical Specification Panel 18.5” TFT (with LED backlight) Power Management On: 20 Watts (typical), 25 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution WXGA 1366 x 768 max. Vertical Frequency 60Hz max. Pixel Dimension 0.3 x 0.3 mm Display Color 16.7M Tilt 0° (+0/-2) ~ 20° (+/-2) Active Display Area 409.8 mm x 230.
Wall-mount instruction Preparing To Install The Optional Wall Mount Arm (not included) This LED Monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the LED Monitor before performing the procedure below. 1. Lay the LED Monitor face down on a soft surface. 2. Remove the hinge cover. 3. Remove the one screw holding the stand to the hinge. 4. Remove the stand.
Care and Maintenance Care Avoid exposing your LED Monitor directly to sunlight or other heat source. Place your LED Monitor away from the sun to reduce glare. Put your LED Monitor in a well ventilated area. Do not place any heavy things on top of your LED Monitor. Make certain your LED Monitor is installed in a clean and moisture-free area. Keep your LED Monitor away from magnets, motors, transformers, speakers, and TV sets.
Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/product_registration.
2001171038P
