Planar Systems, Inc. 1195 NW Compton Drive Beaverton, OR 97006-1992 www.planar.com Customer Service Planar provides the following technical support services: Internet Support For support available 24/7 visit Planar's Online Technical Support at www.planar.com/support. Our Online Technical Support is where you'll find solutions to many common problems, download documentation, view answers to frequently asked questions (FAQs) and get troubleshooting advice, or email Planar your support question.
The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be reproduced, translated to another language or stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission. Windows is a registered trademark of Microsoft, Inc.
1 Table of Contents Usage Notice Precautions ................................................................................. 2 Introduction About the Product ....................................................................... 3 Package Overview ...................................................................... 4 Installation Product Overview ........................................................................ 5 Start Your Installation ........................................................
2 Usage Notice Warning- To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. Warning- Please do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings, precautions and maintenance as recommended in this users manual to maximize the life of your unit. Do: q q q q q Turn off the product before cleaning. Use only a dry soft cloth or clean room wiper when cleaning the LCD Display screen surface.
3 Introduction About the Product Having a 21.3 LCD dsiplay with an active matrix, thin-film transistor (TFT) liquid crystal display (LCD), this product also demonstrate the following outstanding features. q Dual Analog and Digital signal input q 21.3” diagonal screen size q 1600 x 1200 high resolution q Wide Viewing Angle Technology q 31.5 ~ 91.
4 Package Overview LCD Display Power Adapter Power Cord VGA Signal Cable DVI-D Cable Audio-In Cable S-Video Cable Landing Strip Video Cable User’s Guide CD-ROM for Pivot Software Pivot software ( Optional ) Register Your Planar Products Today Thank you for choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/product_registration.
5 Installation Product Overview u Front View Liquid Crystal Display (LCD Display) Panel Controls Stand u Back View Kensington Security Lock Slot Connector Ports (Inside the back cover) V ID E O Audio DVI Input Port DC-In Analog Input Port Composite Video S - V ID E O S-Video
6 u Tilt Grasp the LCD Display with both hands and adjust the tilt as desired. Tilt Angle:-5° ~ 35° u Kensington Security Slot The monitor can be secured to your desk or any other fixed object with Kensington lock security products. Kensington lock is not included.
7 K VESA Mount on your monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface Standard which defines a physical mounting interface for flat panel monitors, and corresponding standards for flat panel monitor mounting devices, such as wall and table arms.The VESA mounting interface is located on the back of your monitor. The VESA Mounting slots of this model are located inside the rear cover (shown in the following figure).
8 Start Your Installation u Connecting the Display (Figure 10.1) To setup this display, please refer to the following figure and procedures. 1. Be sure all equipment is turned off. 2. Connect the DC power cord to the power connector; plug one end of the AC power cord into the power adapter, and the other end into an electrical outlet(). 3. For the PC with Analog output: Connect the VGA signal cable from display VGA input connector to the 15-pin connector of your host computer and tighten the screws().
9 Figure 10.
10
11 User Controls Front Panel Controls No / Icon MENU Control Function Menu button To pop the OSD menus. Select/Auto To select the adjustment items from OSD menus. To activate the "Auto adjustment" function to obtain an optimum image. Brightness Minus/Minus 1. Decreases the brightness of the display image. 2. Decreases the value of the adjustment items. Brightness Plus/Plus 1. Increases the brightness of the display image. 2. Increases the value of the adjustment items.
12 How to Use the OSD Menus 1. Press the “MENU” button to pop up the “on-screen menu” and to select among the four Main Menus. 2. Choose the adjustment items by pressing the “SELECT” button. 3. Adjust the value of the adjustment items by pressing the “!” or “"” button. 4. After a period of inactivity.*(base on a user setting) the OSD menus will automatically disappear.
13 On-Screen Display Menus Main Menu Menu Level 1 DISPLAY Menu Level 2 0 ~ 100 0 ~ 100 -45+45 Saturation Adjusts the image from black and white to full saturated colour. 0 ~ 100 Flesh-tone Black Level * Scaling Auto Adjust * off/Week/Soft/Strong To adjust black level of the image 1:1/Full/Aspect Select Phase * Synchoronizes the signal timing of the display to that of the graphics card. When you experience an unstable to flickering image,use this function to make an adjustment.
14 Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following trouble shooting. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. " Check that all the I/O and power connectors are correctly and well connected as described in the “Installation” section. " Make sure the pins of the connectors are not crooked or broken. Problem: Partial image or incorrectly displayed image.
15 Warning Signal Sometimes you may see warning messages for this LCD Display. This means that the LCD Display cannot correctly receive the signal from the computer graphics card. "No Signal This message means that the LCD Display has been powered on but it cannot receive any signal from the computer graphics card. Check all the power switches, power cables, and VGA signal cable. "Out Of Range This message means that the signal of the computer graphics card is not compatible with the LCD Display.
16 Product Dimensions 482.28 mm / 18.98” 533.14mm/20.98” Front View 64.5mm/2.54” Side View 222.00mm/8.
17 Compatibility Modes Mode Resolution Frequency (Hz) H. Frequency (kHz) IBM VGA 640 x 350 70 31.5 IBM VGA 640 x 480 60 31.5 IBM VGA 720 x 400 70 31.5 VESA VGA 640 x 480 72 37.9 VESA VGA 640 x 480 75 37.5 VESA VGA 640 x 480 85 43.3 VESA SVGA 800 x 600 56 35.1 VESA SVGA 800 x 600 60 37.9 VESA SVGA 800 x 600 72 48.1 VESA SVGA 800 x 600 75 46.9 VESA SVGA 800 x 600 85 53.7 VESA XGA 1024 x 768 60 48.4 VESA XGA 1024 x 768 70 56.
18 Pivot Software Installation Follows are the procedures for pivot software set up. 1. Insert the Pivot Pro CD-ROM into the CD-ROM driver. 2. Run the Start_Pivot program and select the pivot option to install portrait displays software on your computer. 3. Restart your computer. To Change orientation, right click anywhere on the desktop and select Rotate 0, 90, 180, or 270 from the menu. Now hold the edges of your display and rotate it. 4. Start exploring the benefits of your new portrait monitor.
Planar Systems, Inc 1195 NW Compton Drive Beaverton, OR 97006-1992 www.planar.com © 2006 Planar Systems, Inc. Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. Technical information in this document is subject to change without notice. P/N:36.61604G002 Rev.
