Systems Display Reference Guide

QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Display
Package Contents
Identify Components
Position Display
Desk Stand Features
INSTALLING THE DISPLAY
Set DIP Switch
Install Display Controller
Connect Video and Power
Install Display Driver
Change Display Properties
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
LED Status Lights
Single Desktop
USB Connection
Component Removal
Power Management
Palette Options
7
Dome C3 Display
Set the DIP Switch
To enable VGA mode on the DX display controller, slide switch 1 on the DIP switch
into the ON position. Enable VGA on only one board when you install multiple
DX display controllers.
Disable VGA on all DX display controller if you are using a separate VGA card.
For single desktop mode, slide switch 3 into the ON position.
Warning
If you leave the computer turned
on, you could get an electric shock
and cause damage to the system
components.
Remove the DX display controller
slowly from its package and static-
shielding bag to prevent an
electrostatic discharge.
Static electricity can damage the
controller. When touching the board
or parts of the motherboard, take
these precautions:
• Wear an antistatic wrist strap.
• Discharge your body’s static
electricity repeatedly by
touching the power supply
or the metal surface of the
computer chassis.