PE171
Table of Contents Preface ...............................................................................................................................2 Chapter 1 Installation........................................................................................................3 Unpacking ............................................................................................................................................. 3 Connecting the LCD Monitor and Base .......................................
Preface This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved.
Chapter 1 Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot.
Connecting the LCD Monitor and Base When you open the box to take the base and put on the desk first. Then connect the LCD Monitor and base please.(See fig.1-1 ) Figure 1-1 Viewing Angle Adjustment The LCD Monitor is designed to allow users to have a comfortable viewing angle. The viewing angle can be adjusted from -5°to +30°.(See fig. 1-2) Figure 1-2 Warning Do not force the LCD Monitor over its maximum viewing angle settings as stated above.
Power Management System This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal. When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will light yellow. Optional Mounting Alternatives Detaching LCD Monitor from Its Stand Unscrew screws n the swivel base support column and pull downo the hinge to release.
Chapter 2 Display Controls User Controls A brief description and the location of all LCD Monitor function controls and indicators: Figure 2-1 1 DC Power Switch 2 DC Power-On Indicator 3 4 Function Select Buttons Adjustment Control Buttons Press the power switch to switch the monitor ON/OFF. LED lights Green color --- Power is ON. LED lights Yellow --- Monitor is in "Power Saving Mode". LED is off --- Power is OFF. Press either left or right control button for OSD (On Screen Display) menu selection.
Function Description Icon Function Function Description Brightness Contrast H. Position V. Position Sharpness OSD Transparency Phase Clock Color Temperature OSD H. Position OSD V. Position Graph / Text Recall Language 101 scales of brightness are available to choose from (0 to 100). 101 scales of contrast are available to choose from (0 to 100). (Digital Input Mode not support.) This function let's you adjust the display's horizontal position. (Digital Input Mode not support.
Chapter 3 Technical Information Specifications LCD Panel Size Display Type Resolution Display Dot Display Area (mm) Display Color Brightness Contrast Ratio Response Time Lamp Voltage Lamp Current Viewing Angle Display Colors Video Input Signal Input Impedance Polarity Amplitude Multi-mode Supported 17" (43 cm) Active matrix color TFT LCD 1280 x 1024 1280 x (RGB) x 1024 337.92 x 270.336 (H x V) 262K 260 cd/m2 (typical), 200 cd/m2 (min.) 450:1 (typical) Ta=25°C Tr+Tf=12ms 650 Vrms (typical) 7.0 mA rms.
Polarity Positive and negative Plug & Play External Connection Supports VESA DDC2B functions Power Input (AC input) Video Cable AC socket 1.8M with 15-pin D-sub connector, 1.8M with 24-pin DVI-D Environment Temperature Relative Humidity Temperature Relative Humidity Operating Condition: Storage Condition: Power Supply (AC Input) Input Voltage Input Current 5°C to 40°C/41°F to 104°F 20% to 80% -20°C to 60° C/-4°F to140° F 5% to 85% Single phase, 100 ~ 240VAC, 50 / 60 Hz 1.
Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing.
Troubleshooting This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA card is selected. Attention This LCD Monitor Supports Multiple VGA Modes. Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.
Planar Systems, Inc. Customer Service 24x7 Online Technical Sup por t: http://www.planar.com/support Suppor port: 1195 NW Compton Drive Beaverton, OR 97006-1992 Tel: 1-866-PLANAR1 (866) 752-6271 Email: PlanarSupport@planar.com Hours: M-F, 5am - 5pm Pacific Time © 2005 Planar Systems, Inc. 03/05 Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. Technical information in this document is subject to change without notice.
