Operations Manual D6015TM SERIES MEDICAL MONITOR D6015TM 15" XGA D6015TM;TS 15" XGA, SAW TOUCHSCREEN D6015TM;TR 15" XGA, RESISTIVE TOUCHSCREEN The Definition of Quality
Planar Systems, Inc. © 2000 “Planar” and “The Definition of Quality” are registered trademarks of Planar Systems, Inc. “ELO” is a registered trademark of Elo TouchSystems, Inc., “GCX” and “GCX Instrument Mounting Systems” are registered trademarks of GCX Corporation. All other trademarks are the property of their respective owners. This document is subject to change without notice. Planar provides this information as reference only.
Contents Planar D6015TM Series Medical Monitor ........................................................ 1 Functional Description.................................................................................................1 Product Features ..........................................................................................................2 Cleaning Instructions ...................................................................................................2 Safety Instructions..................
Figure 1: Controls and Front View ..............................................................................7 Figure 2: Monitor, Rear Ports ......................................................................................8 Figure 3: Connecting the Optional Touchscreen Cable ...............................................9 Figure 4: Screen Angle Settings.................................................................................10 Figure 5: Connecting Power to the Monitor.......................
Planar D6015TM Series Medical Monitor The Planar D6015TM Series Medical Monitor is a 15-inch XGA monitor designed to be versatile, ergonomic, and easy to use. It is capable of displaying most video standards from 640x480 (VGA) to 1024x768 (XGA). The digital controls located on the front panel allow you to easily adjust the monitor’s display parameters using the On-Screen Display (OSD) menus.
Product Features • Display Type: Color Active Matrix LCD • Control Buttons: − − − Function select up and Function select down ( and ) Adjustment increase and Adjustment decrease ( and ) Power on/off ( ) • Adjust speaker volume directly with the Adjustment increase/decrease buttons.
Safety Instructions • Do not place your monitor near a window. Exposing the monitor to rain, water, moisture, or constant direct sunlight can severely damage it. • Do not place anything on top of the monitor-to-computer signal cord. Make sure the cord is placed in an area where it will not be stepped on. • Do not apply excessive pressure to the screen. Excessive pressure may cause permanent damage to the display. • The monitor and power supply units have no user serviceable parts inside.
Symbol Explanations Following are explanations of the symbols found on the monitor or power supply. Indicates proof of conformity to applicable European Economic Community Council directives and to harmonized standards published in the official journal of the European Communities. Tested and certified by CSA to C22.2 N0. 601.1-M1990. If this mark appears with the indicators “C” and “US” the product is certified for both the U.S. and Canadian markets, to the applicable U.S. and Canadian standards.
classified according to Rule 12 as an MDD Class I device – component or accessory. The MDD sets out that manufacturers of Class I medical devices or accessories shall satisfy the requirements in regards to design and manufacturing controls, i.e. the applicable assessment route to be used for CE-marking under the MDD and shall carry the CE-mark according to Annex XII of the directive, with no notified body annotation.
Installation Before you unpack your monitor, prepare a suitable workspace. You need a stable and level surface near a grounded wall outlet in an area which is relatively free of glare from sunlight or other sources of bright light. The monitor is cooled by natural convection (it has no fan). For optimum performance, do not block the cooling vents. While unpacking the monitor, inspect it and other package contents for shipping damage that could cause a fire or shock hazard.
Identifying Components Front View Figure 1: Controls and Front View 1. Monitor Screen The screen is capable of producing most display standards from 640 x 480 VGA to 1024 x 768 XGA. A VESA mounting plate (not shown) is secured to the rear of the monitor and is compatible with GCX Instrument Mounting Systems or other standard VESA swing arms or desk stands. 2.
Rear View 4 5 3 2 1 Figure 2: Monitor, Rear Ports 1. VGA Cable This 1.5 meter (5 ft.) cable has a 15-pin D-Sub VGA connector used to connect to your computer’s VGA port. 2. Power Input Port (locking/latching mini-Din 4-Pin) Connect the low-voltage cable from the power adapter to this port. 3. 9-Pin D-Sub Connector for Optional Touchscreen Connect the cable provided with the touchscreen package to this port and to your system’s 9-pin serial port. 4.
Connecting the Optional Touchscreen If your monitor has this optional feature, connect the monitor’s 9-pin D-sub serial port to your computer’s 9-pin RS232 serial port using the cable which came with the optional touchscreen package. Figure 3: Connecting the Optional Touchscreen Cable Next connect the male end of the RS232 cable provided with the optional touchscreen package to the 9-pin serial port at the back of the monitor (refer to Figure 3).
Adjusting the Viewing Angle The Planar D6015TM Series Medical Monitor was designed to allow adjustment to a comfortable viewing angle. The monitor’s angle settings range from -5° to +25° on the optional desk stand (Figure 4). Figure 4: Screen Angle Settings Caution: Do not force the monitor past its maximum extension in either direction or you may damage the monitor or the desk stand.
Connecting Video With the power to your computer and the monitor off, connect the supplied video cable from the monitor to the computer’s VGA port (Figure 6). Figure 6: Connecting the Monitor to Your System Make sure the VGA cable connector is securely connected to the VGA port on your computer. Tighten the connecting screws to ensure a secure connection. Turn the monitor on first, then turn on the computer. The LED on the monitor will flash until it receives a video signal from the system.
Power Management System The Planar D6015TM Series Medical Monitor complies with the VESA DPMS power management proposal. The VESA DPMS proposal provides four phases of power-saving modes by detecting the horizontal or vertical sync signal as shown in the table below. Mode DC Input Power (monitor only) AC Input Power (incl. AC adapter) LED Status On (with audio) 30.0 W max. 40 W max. Steady Green On (without audio) 28.0 W max. 37 W. max. Steady Green Standby 4.5 W max. 6 W max.
The Display Controls Located on the front of the Planar D6015TM Series Medical Monitor are five buttons for operating the monitor and accessing the functions on the On-Screen Display (OSD). Button 1. Function select up 2. Function select down 3. Adjustment increase 4. Adjustment decrease 5. Power ON/OFF 6.
Adjusting the Medical Monitor’s Display Using the monitor’s On-Screen Display (OSD), you can adjust the contrast, brightness, display position, display clarity, and color temperature of the display. You can also adjust the stereo speaker volume and set OSD parameters. Access the OSD any time both your computer and monitor are on. If your computer is off or in power saving mode, the OSD is inaccessible. The OSD makes adjusting the display settings quick and easy.
OSD Main Menu To access the OSD Main Menu, briefly press the Power button (see Figure 8). The following screen appears: MAIN MENU BASIC SETTING POSITION AUTO-ADJUST COLOR TEMP. MISCELLANEOUS RESET ADJ KEY TO START Figure 10: The OSD Main Menu The control functions are grouped into five categories as shown on the Main Menu in Figure 10. Continue pressing the up and down Function buttons ( and ) to scroll through the menu items.
Position CLOCK PHASE DEFAULT SIZE NATIVE SIZE H-POSITION V-POSITION H-SIZE V-SIZE GRAPH/TEXT TO MAIN MENU Adjust the display pixel alignment. Adjust the screen display for focus and clarity. Expand the display to full screen. (Not available in all modes.) Adjust display to original size. (Not available in all modes.) Adjust the display position horizontally. Adjust the display position vertically. Horizontally adjust display size. (Not available in all modes.) Vertically adjust display size.
Quick Adjustment Functions When the OSD Main Menu is not active, the following functions are available for quick adjustment. Press the upper Function button ( ) to enable the small Contrast icon. Use the Adjustment buttons to increase or decrease the contrast level. Press the lower Function button ( ) to enable the small Brightness icon. Use the Adjustment buttons to increase or decrease the Brightness level. Press the upper or lower Adjustment button ( or ) to enable the small Volume icon.
Technical Information Planar D6015TM Series Medical Monitor Specifications Display Panel 15-inch (381 mm) XGA active matrix LCD (AMLCD) Display Colors 262,144 Dimensions: w/bracket 408 x 333 x 85 mm (W x H x D) w/desk stand 408 x 387 x 175 mm (W x H x D) Weight: w/bracket 4.9 kg (10.8 lbs.) w/desk stand 6.9 kg (15.2 lbs.) Display Area 304.1 x 228.
Video Modes The Planar D6015TM Medical Monitor will support 25 video timing modes which were preset at the factory. Those modes not supported will cause the monitor to go into power-saving mode. Once a mode is optimized, there is no need to make any further adjustment as long as the VGA mode remains unchanged. These specifications are subject to change without notice. Mode Horiz. Freq. (kHz) Vert. Freq. (Hz) Pixel Freq. (MHz) H/V Sync. polarity Comment Mode ID No. 640x400 31.469 70.087 25.
Connectors DC Input Locking or latching 4-pin Mini DIN Receptacle. The vendor P/N is H.C.E. MD00027 or equivalent. Description Pin Pin Description +12VDC 1 3 +12VDC GND 2 4 GND Shield Shield Video Input 15 pin D-subminiature connector. The vendor P/N is Aces 85314-1500 or equivalent.
Mechanical Outline Drawings All dimensions shown in the following drawings are specified in millimeters.
Figure 12: Desk Stand Option Figure 13: Display Front 22 Operations Manual (OM700-02)
Troubleshooting Procedures The Planar D6015TM Series Medical Monitor was factory adjusted to standard VGA timing. Due to output timing differences among various VGA cards, you may initially experience an unstable or unclear display when a new display mode or new VGA card is selected. This monitor supports multiple VGA modes. Refer to the “Technical Information” on page 18 for a listing of the factory preset modes supported.
PROBLEM: Signal Over Supported Range When the signal is out of the monitor’s frequency range, the screen display will not be centered and the following message will be displayed: SIGNAL OVER RANGE! PRESS FUN/ADJ KEY FUN→ H-POSITION ADJ→ V-POSITION Pan the display picture with the Function and Adjustment control buttons (see page 7). PROBLEM: There is No LCD Display 1.
Description of Warranty Planar Systems (Planar) warrants that the goods sold hereunder will be free of defects in materials and workmanship, and such goods will substantially conform to the specifications furnished by Planar, and to any drawings or specifications furnished to Planar by the Buyer if approved by Planar. This warranty shall be effective only if Planar receives notice of such defect or nonconformance during the period of the warranty.
The warranty set forth above shall not be enlarged, diminished or affected by, and no obligation or liability shall arise from Planar, any authorized dealer or any other person's rendering of technical advice, assistance or services in connection with the buyer's order of the goods furnished hereunder. The Buyer is not relying on Planar's skill or judgment to select or furnish suitable goods.
Ordering Information Product Part Number D6015TM 15-Inch XGA Medical Monitor D6015TM 15-Inch XGA Medical Monitor, w/deskstand D6015TM;TS 15-Inch XGA Medical Monitor, SAW Touchscreen D6015TM;TS 15-Inch XGA Medical Monitor, SAW, w/deskstand D6015TM;TR 15-Inch XGA Medical Monitor, Resistive Touchscreen D6015TM;TR 15-Inch XGA Medical Monitor, Resistive, w/deskstand 996-0431-00 996-0432-00 996-0435-00 996-0436-00 996-0433-00 996-0434-00 Planar power adapter, model PPA4512UM Planar video cable Planar touchscr
North & South America OEM Sales Europe & Asia-Pacific OEM Sales Planar Systems, Inc. 1400 NW Compton Drive Beaverton, OR 97006-1992 Tel. +1(503) 690 1100 Fax +1(503) 690 1493 sales@planar.com app_eng@planar.com Planar Systems, Inc. Olarinluoma 9, P.O. Box 46 FIN-02201 Espoo, Finland Tel. +358 9 420 01 Fax +358 9 420 0200 intlsales@planar.com tech_support@planar.com Visit the Planar web site: http://www.planar.