EL320.256-FD7 320 x 256 Pixel, High Brightness, High Contrast Display

ManualsBrandsPlanar ManualsMonitorHigh Brightness

EL320.256-FD7 320 x 256 Pixel,

High Brightness, High Contrast Display

USER’S MANUAL

www.planar.com

Summary of content (18 pages)

PAGE 1
EL320.256-FD7 320 x 256 Pixel, High Brightness, High Contrast Display USER’S MANUAL www.planar.
PAGE 2
Revision Control Date Description November 1997 Document number PI02355 Ver 3 June 2004 Document number 020-0353-00A
PAGE 3
Contents Product Profile ............................................................................................................................................................3 EL Technology.............................................................................................................................................................3 Electrical Characteristics...................................................................................................................................
PAGE 4
Figures Figure 1. EL Technology......................................................................................................................................3 Figure 2. Connector Layout ...............................................................................................................................4 Figure 3. Timing Characteristics.......................................................................................................................7 Figure 4. Setup and Hold Timing.....
PAGE 5
Product Profile The EL320.256–FD7 display is a low power, rugged, electroluminescent (TFEL) display which replaces the bulky CRT in control and instrument product designs. It features an integrated DC/DC converter, and its compact dimensions save space that can allow addition of features or reduction in overall size. It is designed to function in extreme environments, and its clear display is viewable under most lighting conditions at wide viewing angles.
PAGE 6
The EL320.256–FD7 display includes a light absorbing ICE ( Integrated Contrast Enhancement) construction of the display glass. ICE construction significantly improves the luminance contrast of the display in bright ambient. The ICE also removes the halo around the lit pixels in dark ambient making the appearance of each pixel extremely crisp and clear. In the EL320.
PAGE 7
Input Connectors and Programmable Jumpers Table1. Input Connectors and Programmable Jumpers. Pins Signal Symbol Description J1(Data/power input connector) 1, 2 Voltage Vcc2 3, 4 5 Voltage Enable Vcc1 _ENABLE Ground Two-bit data Vertical Sync GND TVID 11 Horizontal Sync HS 13 Video Clock VCLK 15 Video Data VID 6,8,10 12,14,16 7 9 VS Supply voltage (+11…30V) converted to required internal high voltages. Supply voltage (+5 V) for the logic.
PAGE 8
Connectors Table 2. Connectors. J1 16-pin header Mating J2 4-pin header Mating Protector ODU 511.066.003.016 or eq. ODU 517.065.003.016 or eq. Hirose DF1–4P–2.5 DSA or eq. Hirose DF1–4S–2.5 R 24 or eq. Hirose DF1–4A 1.33 Control basics The EL panel has 320 transparent column electrodes crossing 256 row electrodes in an X-Y fashion. Light is emitted when an AC voltage is applied at a row-column intersection.
PAGE 9
Input Specifications Table 3. Input Specifications. Parameter Logic input HIGH Logic input LOW Supply voltage Supply current at 5V Supply voltage Supply current at 12V @ 60 Hz @ 120 Hz Power consumption @ 60 Hz @ 120 Hz Symbol Min. Typ. Max. Absolute min./max. 4.75V — 10.8V — — 5.0V 0.1A — Vcc1 0.8V 5.25V 0.2A 30V Vcc1 + 0.5V Abs. max. –0.5V Abs. min. 6.0V Abs. max. — — 0.25A 0.5A 0.5A* 0.9A — — 3.5W 6W 6W* 11W 2V Vcc1 Icc1 Vcc2 Icc2 33V Abs. max. * Values verified at design, not measured.
PAGE 10
Table 4. Timing Characteristics. Description Min T1 Vertical Front Porch T2 VS HIGH/LOW time T3 Vertical Blank T4 Vertical Period VS frequency 60 1 40 256 Description Min T5 HS setup to VS T6 HS hold from VS T7 HS Low Time T8 HS High Time T9 HS period (tHS) 1 3 4 320 19 Max Unit Note 1 2 120 µs tVCLK µs tHS Hz Typ Unit Note µs µs tVCLK tVCLK µs 3 320 4 Notes: 1. This time is needed to display the last row and to initiate the following frame. 2. Only rising edge is used. 3.
PAGE 11
Operational Specifications Environmental Table 6. Environmental Characteristics. Temperature Operating –25…+65°C –40…+85°C –40…+70°C (no permanent damage) Non-operating Operating Survival Humidity Relative Humidity Damp Heat +40°C, 93% RH, Operating (IEC 68-2-3) +25…+55°C, 95% RH, Non operating (IEC 68-2-30) Altitude 15,000 m (50,000 ft.) above sea level Standard IEC 68–2–13 Vibration 20…500 Hz ASD level 0.
PAGE 12
Optical Determined at 25°C ambient. Display colour Wide band amber (ZnS:Mn) Peak wavelength 580nm typ. Table 7. Optical Characteristics. Areal Luminance 28 cd/m2 (8.2 fL) min @ 60Hz 55 cd/m2 (16 fL) min @ 120Hz Measured at the center and the four corners of the screen. On Luminance Luminance Non-uniformity Maximum 30% = (1– min. luminance/max luminance) x 100.
PAGE 13
Mechanical Characteristics Figs. 6 shows the mechanical dimensions of a EL320.256-FD7 display unit. Table 8. Display External Dimensions. Height 110 mm 4.33 in. Width 130 mm 5.12 in. Depth 33.0 mm 1.30 in. Weight 310 g max. 10.9 oz. max The EL320.256–FD7 is mechanically compatible with existing Planar MD320.256 and EL320.256 displays Table 9. Display Viewing Area Characteristics. Active Area millimeters (inches) height width 76.7 (3.02) 95.9 (3.77) height width 0.30 (0.012) 0.30 (0.
PAGE 14
Fig 5. Viewing Area Characteristics in mm. Installation and Handling EL320.256–FD7 should be mounted using the four M3 corner standoffs. It is recommended to use also the center nut in the mounting if the vibration or shock stress is severe. Before touching the display, necessary precaution must be taken to prevent application of static charges on the display from the operator or tools. The display is made of glass material and should be handled with proper care.
PAGE 15
Fig 6. Mechanical dimensions in mm. EL320.
PAGE 16
Description of Warranty Seller warrants that the Goods will conform to published specifications and be free from defects in material for 12 months from delivery. To the extent that Goods incorporate third-party-owned software, Seller shall pass on Seller's licensor's warranty to Buyer subject to the terms and conditions of Seller's license. Warranty repairs shall be warranted for the remainder of the original warranty period.
PAGE 17
Ordering Information Product Part Number Description EL320.256-FD7 996-5089-00 EL320.256-FD7 AG 996-5089-01 EL320.256 ICE high-bright display, Op. temp -25 - +65º C EL320.256-FD7 with optically bonded anti-glare film Design and specifications are subject to change without notice. Support and Service Planar is a U.S. company based in Beaverton, Oregon and Espoo, Finland, with a world-wide sales distribution network.
PAGE 18
Planar Systems, Inc. Customer Service 24x7 Online Technical Support: http://www.planar.com/support Americas Support 1195 NW Compton Drive Beaverton, OR 97006-1992 Tel: 1-866-PLANAR1 (866) 752-6271 Hours: M-F, 5am - 5pm Pacific Time Europe and Asia-Pacific Support Olarinluoma 9 P.O. Box 46 FIN-02201 Espoo, Finland Tel: +358-9-420-01 Hours: M-F, 7:00am - 4pm CET © 2004 Planar Systems, Inc. 06/04 Planar is a registered trademark of Planar Systems, Inc.