Product Manual PDP 42"
・Safety precautions Power Supply - Warning AC plug should not be touched with wet hands. It may cause an electric shock. Do not use damaged electric cord/ plug, or loose outlet. ・It can cause an electric shock or a fire. ・It can cause an electrical shock. Do not use multiple devices in an outlet at the same time to avoid the overload. ・It may cause a fire due to overheating from the outlet. Power Supply - Warning Fully insert the plug into the outlet.
Warning : Serious injury or fatal injury may occur, if the indicated warning is not followed. Caution : Minor injury or product damage may occur, if the indicated caution is not followed. Installation - Warning Do not place any liquid and foreign objects on or above the PDP. ・It may cause an electric shock and a fire. Contact your dealer for service. Do not install the PDP where water (rain) drops can enter the enclosure, or where there is oil or humidity.
・Safety precautions Usage and Maintenance - Warning During a thunderstorm, unplug the power cord and never touch t he antenna cable. Do not insert any foreign objects such as wires and drills into the PDP ventilation slots or the A/V terminal. ・It can cause an electric shock or a fire. ・It may cause an electric shock or a fire. Do not allow children to play with the PDP. ・It may falls or flip over and may cause serious injury. Never attempt to disassemble, repair or modify the PDP.
Considerations for Usage Still image (immovable) screen may cause permanent damage to PDP. 1. Lengthy display of still images from video games, banners, graphics and others may fatally damage the screen. 2. When using Picture-In-Picture, permanent damage may occur if the sub-image screen stays on the corner of screen for a long time. 3. When using the PDP in 4 : 3 formats with sidebars for a long period of time, it may cause damage to the plasma panel.
・Contents ・Safety precautions - Power Supply ……………………………………………………………… 2 - Installation ………………………………………………………………… 3 - Usage and Maintenance ………………………………………………… 4 ・Considerations for Usage ………………………………………………… 5 ・Contents ………………………………………………………………… 6 ~ 7 User Guidance Information ・Names of each part …………………………………………………… 8 ~ 9 ・Options …………………………………………………………………… 10 ・Accessories ………………………………………………………………… 11 ・Installing the PDP - Installing on a wall ……………………………………………………… 12 - Installing on a desktop ……………………………
・Still ………………………………………………………………………… 26 ・Info ………………………………………………………………………… 26 ・Menu ……………………………………………………………………… 27 Application ・PSM (Picture Status Memory) ………………………………………… 28 ・Adjusting the screen in USER mode ………………………………… 29 ・ARC (Aspect Ratio Control) …………………………………………… 30 ・Watching PIP ……………………………………………………………… 31 ・PC mode ……………………………………………………………… 32 ~ 33 ・Color Tone (Pre-Set) …………………………………………………… 34 ・Color Tone (Manual adjustment) ……………………………………… 35 ・SSM (Sound Status Memory) ………………………………………… 36 ・Equaliz
・Names of each part Front View Main Power Button - Please turn off the main power switch, if the PDP will not be used for a long period of time.
Back View External Speaker Connection Terminal (8Ω) RS-232C Terminal AV input (composite) Terminal RGB PC Input Terminal (VGA / SVGA / XGA) AC Input Terminal Component (DVD / DTV) Input Terminal (480i / 480p / 720p/ 1080i) S-Video Terminal Audio Input Terminal (S-Video, Component, DVI) 9
・Options Options ※ To improve the quality of the PDP, specification is subject to change without notice. Please contact your dealer for current options available.
Accessories ※ The configuration of the components may look different from the following illustration. RGB Cable Power Cord Video Cable : U.S.A only User's Manual Remote Controller Battery 1.
・Installing the PDP Installing on the wall ▶ You can install PDP in wall-mounted style as shown in the figure above. Things to consider ・Please secure enough space for safe use. (Please refer to A and B.) ・Installation of the PDP in an improperly ventilated location can cause a fire or damage to the PDP due to increased temperature. A (Usage of wall-mount) ※ Contact your dealer to purchase the "Adjustable-angle wall mount" required for wall-mounted installation.
Installing on a desktop ・This is not floor-standing unit. ▶ You can install PDP in a desktop style as shown in the figure above. Things to consider ・Do not install on an unstable location with support area smaller than the PDP. ・Please refer to the desktop stand user's manual for details of installation. B (Usage of stand) ※ Please contact your dealer to purchase the "speakers".
・Remote controller ※ Functions of remote controller buttons The remote controller is using Infra-Red (IR). Point it towards the front of the PDP. The remote controller may not work correctly if it is operated out of range or out of angle.
If remote controller does not work 1. Check the polarity (+,-) of the batteries in the remote controller. 2. Check that the batteries have power. 3. Check that the PDP is powered and that it is properly plugged in. 4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the PDP. Inserting batteries into remote controller 1. Firmly press the ▼ part on the cover and slide the cover in the direction indicated by the arrow. 2.
・Connecting to the VCR ・Connecting to the Cable TV Connecting to the VCR Connecting to the AV Input (composite) terminal (R) Connect the audio/video cable from audio/ video output terminal of VCR to the AV Input terminal of PDP. (yellow is for video, white is for audio (left), red is for audio (right)).
Connecting to the Cable TV In order to watch cable TV, subscribe to your local cable TV company and install a separate converter (Set-Top-Box). (R) Connecting to the AV Input (composite) terminal (L) Audio Video S-Video Connect the audio/ video cable from audio/ video output terminal of the SetTop-Box to the AV Input terminal of PDP. (yellow is for video, white is for audio (left), red is for audio (right)).
・Connecting to the Camcorder/ Video game console ・Connecting to the DVD player Connecting to the Camcorder/ Video game console Connecting to the AV Input (composite) terminal (R) Connect the audio/ video cable from audio/ video output terminal of the camcorder/ video game console to the AV Input terminal of the PDP. (yellow is for video, white is for audio (left), red is for audio (right)).
Connecting to the DVD player Connecting to the component terminal ・Connect component video cable from the component video out- Y PB (R) PR Video (L) Audio put terminal of DVD player to the component terminal (Y, PB, PR) of the PDP. ・Connect audio cable from the audio output terminal of DVD player to the component audio input terminal of the PDP. ・You can make S-Video connection or AV Input (composite) connection instead of connecting to component terminal.
・Connecting to the DTV receiver Connecting to the Component terminal/ Connecting to the DVI-I terminal Y PB PR RGB COMPONENT (R) (L) (R) COMPONENT (L) RGB Video Audio Connecting to the component terminal/ Connecting to the RGB terminal ・A separate Set-Top-Box may be required to receive digital broadcasting. ・In 1080i mode of DTV mode, the screen size selection is disabled, but fixed to 16:9 the screen size does not change.
Connecting to the DVI-I terminal Some of DTV receivers (Set-Top-Box) have an RGB connector (D-sub 15 pin) instead of a component output. The DVI adapter, which provides this connection terminal for the PDP, may be used for this connection. Connect the DVI adapter into the VGA cable and connect to the PDP DVI-I input terminal. Connect the other end of the cable to D-sub output terminal of DTV receiver.
・Connecting to the PC Connecting to the DVI-I terminal Connecting to the Analog RGB Connecting to the Analog RGB terminal Connect DVI adapter into VGA D-Sub cable, then connect to the PDP DVI-I input terminal. Connect the other end of the VGA Cable to D-sub Video output terminal of PC. Connect audio cable from the audio output terminal of PC to DVI audio input terminal of the PDP. (PC audio cable is not included and should be purchased separately.) ※ PC audio works only if a Sound Card is installed.
How to use as PC Monitor 1. Turn on the PDP and press 2. Use on the remote controller. to select RGB1(Analog) and then press . (If the PC output is set to Digital, select RGB2(Digital).) 3. This PDP does not support Plug & Play function. When setting the PDP, select default. 4. Set the PC video output mode to VGA (640×480)/ SVGA (800×600)/ XGA (1024×768). In the mode higher than SXGA (1280×1024), "Out of Range" message appears. Be sure to change your PC video format to less than XGA mode.
・Powering the PDP ・Selecting input source Prior to using the PDP Insert the power plug. Connect external equipment properly. ・Please use only after carefully reading this manual. ・Check the power connection to the AC outlet and the connection of AC input to the PDP. Power On/ Off ・To turn the PDP on : Press the "Main Power" button of PDP and then press the "Standby" button. ・To turn the PDP off : Press "Standby" button on the PDP and then press the "Main Power" button.
Selecting input source Select the required input using with in the pop up menu by pressing and then select . Press Composite button, S-VIDEO button, COMPONENT button, RGB1 button, and RGB2 button on the remote. Ex) When selecting Analog RGB, press RGB1 button.
・VOLUME - Adjusting the volume・MUTE - To mute the sound ・STILL - To pause the screen・INFO - To check the current state ・MENU - Checking the menu VOLUME - Adjusting the volume Press for the volume increasing and press or decreasing. MUTE - To mute the sound Press . If you press the button again, the sound turns back on. STILL - To pause the screen Press . If you press the button again, the screen moves again. INFO - To check the current state Press . The current settings are displayed.
MENU - Checking the menu If input selections are "AV Input (composite)", "S-video", and "Component", the video menu is activated. If input selections are "RGB1" or "RGB2", the computer menu is activated. The remote controller should be used for detailed menu settings and to change the settings. Press . Use to move the cursor bar up and down in the menu as shown in the figure. Use to move to sub menu and store the setting value. Use to leave the main menu.
・PSM (Picture Status Memory) ・Adjusting the screen in USER mode PSM (Picture Status Memory) Press . Press repeatedly to select the desired screen. Standard Dynamic Movie Mild Game User Press . 1. Press to move to 2. Press to get into a sub menu. 3. Select the required mode with . . ・Standard : It is the best screen setting (factory setting). ・Dynamic : Select when using the PDP in a brightly lit environment. ・Movie : Select when watching a movie. Then, *Film mode is operated.
Adjusting the screen in USER mode This is available when input signals are one of "AV input(composite)", "S-Video", and "Component". ・Adjustment is possible either in one of preset modes or in User mode. ・User defined values are stored in the User mode. Press . 1. Press to move to . 2. Press to get into a sub menu. 3. Select the item to adjust with . 4. Adjust the setting value with . Press after the adjustments are made. To leave from the main menu, press again.
・ARC (Aspect Ratio Control) ・Watching PIP ARC (Aspect Ratio Control) Press . Press repeatedly to select the desired screen size. Zoom 16 : 9 Panorama 4:3 Zoom 16 : 9 4:3 Panorama Screen Size ・16 : 9 - It is a full screen size format. ・Zoom - It enlarges the natural screen factor by approx. 5 % ・Panorama - It makes 4:3 format fit into 16 : 9 format with minimal loss in content. ・4 : 3 - It is the standard format of broadcasting.
Watching PIP (Picture In Picture) Press . The followings will be displayed : Press PIP [Large] to activate PBP at once. PIP [Small] PBP Normal This function will work on Analog RGB, Digital RGB, Composite, S-video, and Component signals as inputs to main screen and Composite, S-Video and Component (480i) as inputs to sub-screen. When watching PIP, the main screen and the sub-screen may have differences in the quality of screen color.
・PC mode Adjusting the computer screen This is an auto adjustment for Analog RGB only. Auto adjustment On Analog RGB use Auto adjustment, When the screen is not focused or centered. 1. Press . 2. You may have to press multiple times to auto-adjust properly. 3. If manual compensation is required, adjust it manually. ※ Auto Adjustment works only on Analog RGB signals.
Manual adjustment Use this if fine adjustment is required after auto adjustment. Press . 1. Press to move to . 2. Press to get into the sub menu. 3. Select the item to adjust with . 4. Adjust the setting value with . Press after making adjustments to return to the previous menu. Press it again to leave the menu. User Mode ・Brightness : It adjusts the brightness of the image. ・Contrast : It adjusts the contrast of the image. ・Phase : It adjusts the phase shift of the image.
・Color Tone (Pre-set) ・Color Tone (Manual adjustment) Color Tone (Pre-set) Press . 1. Press to move to . 2. Press to get into a sub menu. 3. Select the item "Color Tone" with . 4. Select the required color among "Cool", "Normal", "Warm", and "User" with Press after making adjustments to return to the previous menu. Press it again to leave the menu. User Mode ・Cool : This results in a blueish tone. ・Normal : This is standard color setting. ・Warm : This results in a reddish tone.
Color Tone (Manual adjustment) Press . 1. Press to move to . 2. Press to get into a sub menu. 3. Select the item "Color Tone" with 4. Select "User" with 5. Press . . . 6. Select the item to adjust with . 7. Adjust the setting value with . Press after making adjustments to return to the previous menu. Press it again to leave the menu.
・SSM (Sound Status Memory) ・Equalizer SSM (Sound Status Memory) Listening to the selected sound: Press . ※ Select the pre-set sound mode by pressing the SSM button. Standard Music Movie User Press . 1. Press to move to 2. Press to get into sub menu. 3. Select one of the pre-set modes with Press . . after the selection to return to the previous menu. Press it again to leave the menu. Modes ・Standard : It is the flat sound setting with no equalizer effect at all.
Equalizer Adjustment is possible in any equalizer mode and will be stored in the user mode. Press . 1. Press to move to . 2. Press to get into the sub menu. 3. Select equalizer with 4. Press . , then the equalizer menu pop up. 5. Select the menu with the setting value with Press and adjust . after making adjustments to return to the previous menu. Press again to leave the menu. User Mode ・Volume : It adjusts the sound volume.
・Stereo ・Reset Stereo (How to set stereo) If TV signal reception is poor, the separation of stereo will be bad and noisy. In this occasion, set the stereo to mono. Press . 1. Press to move to . 2. Press to get into the sub menu. 3. Select "Stereo" with . 4. Select "Stereo" with . Press after making adjustments to return to the previous menu. Press it again to leave the menu.
Reset (Factory default) It resets all of the parameters to the factory default. Press . 1. Press to move to 2. Press to get into the sub menu. 3. Reset by pressing Press . . after making adjustments to return to the previous menu. ※ The PDP will turn off then turn back on in few seconds. The parameters will be set to factory default.
・Language ・Half Tone Language It adjusts the language of the OSD(On Screen Display) menu. Press . 1. Press to move to 2. Press to get into the sub menu. 3. Select the "Language" with 4. Select the desired language with Press . . after making adjustments to return to the previous menu. Press it again to leave the menu. 40 .
Half Tone It changes the background color of the menu frame. It can be set in a semitransparent or opaque manner. Press . 1. Press to move to 2. Press to get into the sub menu. 3. Select "Half Tone" menu with . . 4. Select "On (Semitransparent)" or "Off (Opaque)" by pressing Press . after making adjustments to return to the previous menu. Press it again to leave the menu.
・Panel Protection ・PBP Mode Panel Protection (How to set the panel protection function) ※ It is recommended that the panel protection mode be used on a paused/ frozen screen or on a screen on which a company's logo remains for a long period. ※ There is a possibility that screen flickers during changing panel protection mode. But, it is not a defect. Press . 1. Press to move to . 2. Press to get into the sub menu. 3. Select the required panel protection mode with Press .
PBP Mode ・It changes the ratio of the PBP screen from 16:9 to 4:3. Press . . 1. Press to move to 2. Press to get into the sub menu. 3. Select "PBP Mode" menu with 4. Select "Mode 1" or "Mode 2" by pressing Press . . after making adjustments to return to the previous menu. Press it again to leave the menu. PBP Modes ・Mode 1 : It makes 16:9 PBP ratio. ・Mode 2 : It makes 4:3 PBP ratio.
・Current Time setting ・On Time / Off Time (Time setting) Current Time ( How to set the current time) It sets the current time and then the automatic turn on/off can be set. The time settings are retained only if the main power is on. If the Main power is off, the time is reset. To retain the time setting, do not turn the main power switch off. Press . 1. Press to move to 2. Press to get into the sub menu. Move to "Hour" with Move to "Minute" with Move to "AM" with Press .
On Time / Off Time (Time setting) Current Time must be set correctly for this function to work. Press . 1. Press to move to . 2. Press to get into the sub menu. 3. Select "On Time" or "Off Time" with Move to "Hour" with Move to "Minute" with . and then adjust the desired "Hour" with and then adjust the desired "Minute" with Move to "AM" with and then select "AM" or "PM" with Move to "Off" with and then select "On" with Press . . . .
・On Time Volume ・Sleep Timer On Time Volume (How to set the volume) Current time must be set correctly for this function to work. Press . 1. Press to move to 2. Press to get into the sub menu. 3. Select "On Time Volume" with 4. Adjust the desired volume value with Press . . after making adjustments to return to the previous menu. Press it again to leave the menu. 46 .
Sleep Timer It sets time to make automatic turn off for the sleeping. Press . The selection of the sleep timer will appear. Sleep Timer: OFF Sleep Timer: 120 Minute Sleep Timer: 15 Minute Sleep Timer: 30 Minute Sleep Timer: 90 Minute Sleep Timer: 60 Minute To disable the sleep timer set it to "Sleep Timer: OFF" by pressing . ※ After the sleep timer appears on the screen for more than 20 seconds without pressing the "Sleep" button, the appeared sleep timer is automatically set.
・Trouble shooting In case a problem occurs with your PDP TV, please take the following steps first. If you still have the problem, turn the power off and contact your dealer or an authorized service center. • Screen related Matters Problem 48 Action The screen does not appear. Is the power plug pulled out? Insert the power plug. Turn the main power button on and press the power button of the remote controller. The screen appears too slowly after the power is turned on.
• Sound related Matters Problem Action but there is no sound. 1. Press the "Mute"button. (page 26) 2. Increase the sound by pressing volume adjustment button. 3. Check if voice terminal of external input is connected properly. 4. Check if speaker cables are connected properly. 5. If it is on PIP mode, convert audio of main screen and sub-screen by pressing S/SWAP. 6. Select and check the other input.
・Trouble shooting ・Supporting display mode • Others Problem remote controller does not work. Action 1. Check if main power is On. 2. Check that the batteries of the remote controller were loaded properly. 3. Check to see if any obstacle exists between the PDP TV and the remote controller and remove it, if any. 4. If the batteries have no power, replace them with two new batteries. PDP TV makes strange noise.
Supporting display mode It is optimal screen when the resolution is 640 x 480. Resolution 640×480 720×400 800×600 1024×768 Horizontal Frequency (KHz) Vertical Frequency (Hz) 31.47 60 37.86 72 37.50 75 31.47 70 35.15 56 37.88 60 48.88 72 46.88 75 48.36 60 56.48 70 60.02 75 Considerations in Installation If any signal of unsupported resolution is input, the "Out of Range" message appears.
・MEMO ・Specifications Component Mode [ Y, CB (PB), CR (PR) ] Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 720×480 15.73 60.00 SDTV, DVD 480i 720×480 15.63 50.00 SDTV, DVD 576i 720×480 31.47 59.94 SDTV, 480p 1280×720 45.00 60.00 HDTV, 720p 1280×720 44.96 59.94 HDTV, 720p 1920×1080 33.75 60.00 HDTV, 1080i 1920×1080 33.72 59.94 HDTV, 1080i Specifications Aspect Ratio Screen Size (H×V) 16 : 9 920.1×518.4mm Resolution 852×480(Wide VGA) Cell pitch (H×V) 0.
MEMO
・MEMO ・User information MEMO
User information Note: This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
