PLANAR LCD MONITOR PE170 MANUAL www.planar.
Table of Contents Table of Contents .................................................................................1 Preface.......................................................................................................2 Chapter 1 Installation ...............................................................................3 Unpacking .............................................................................................................................................
Preface This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved.
Chapter 1 Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot.
Connecting the Display 1. Power off your computer. 2. Connect one end of the signal cable to the LCD Monitor’s VGA port.(See Fig 1-5) 3. Connect the other end of the signal cable to the VGA port on your PC. Figure 1-5 4. Make sure connection are secure. +-Attention This device must be connected to an off-the-shelf video cable in order to comply with FCC regulations. A ferrite-core interface cable is included in the LCD Monitor package.
Chapter 2 Display Controls User Controls A brief description and the location of all LCD Monitor function controls and indicators: Figure 2-1 1 DC Power Switch 2 DC Power-On Indicator 3 4 Function Select Buttons Adjustment Control Buttons Press the power switch to switch the monitor ON/OFF. LED lights Green color --- Power is ON. LED lights Yellow --- Monitor is in "Power Saving Mode". LED is off --- Power is OFF. Press either left or right control button for OSD (On Screen Display) menu selection.
Function Description Ico n Function Brightness Contrast H. Position V. Position Sharpness OSD Transparency Phase Clock Color Temperature OSD H. Position OSD V. Position Graph / Text Recall Language Function Description 101 scales of brightness are available to choose from (0 to 100). 101 scales of contrast are available to choose from (0 to 100). This function let's you adjust the display's horizontal position This function let's you adjust the display's vertical position.
Icon 9300 7500 6500 User Function CIE coordinated Color Temperature of 9300°K CIE coordinated Color Temperature of 7500°K CIE coordinated Color Temperature of 6500°K Three colors (Red, Green, Blue) can be adjusted from the OSD menu Description Sets the CIE coordinate color temperature to 9300°K Sets the CIE coordinate color temperature to 7500°K Sets the CIE coordinate color temperature to 6500°K Sets the settings to a by user defined CIE Temperature.
Chapter 3 Technical Information Specifications LCD Panel Size Display Type Resolution Display Dot Display Area (mm) Display Color Brightness Contrast Ratio Response Time Viewing Angle 17" (43 cm) Active matrix color TFT LCD 1280 x 1024 1280 x (RGB) x 1024 337.92 x 270.336 (H x V) 262K 250 cd/m2 (typical) 350:1 (typical) Ta=25°C Tr=8ms Tf=17ms Vertical: -60° ~ +65° Horizontal: -75° ~ +75° 16.7M with FRC or Dithering Display Colors Video Analog RGB 0.7Vp-p 75 Ohm ± 2% Positive, Negative 0 - 0.7 ± 0.
Plug & Play External Connection Supports VESA DDC1 and DDC2B functions Power Input (AC input) Video Cable AC socket 1.8M with 15-pin D-sub connector Environment Operating Condition: Storage Condition: Temperature Relative Temperature Relative 5°C to 40°C/41°F to 104°F 20% to 80% -20°C to 60° C/-4°F to140° F 5% to 85% Power Supply (AC Input) Input Voltage Input Current Single phase, 100 ~ 240VAC, 50 / 60 Hz 1.2 A maximum Size and Weight Dimensions Net Weight Gross Weight 374 (W) x 394.
Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. H. Freq. V. Freq. Pixel Freq. H/V Sync. Resolution Mode (KHz) (Hz) (MHz) Polarity 640 x 350 31.469 70.087 25.175 +/VGA-350 640 x 400 24.830 56.420 21.050 -/NEC PC9801 640 x 400 31.469 70.087 25.175 -/+ VGA-400-GRAPH 640 x 400 31.50 70.15 25.197 -/NEC PC9821 640 x 480 31.469 59.940 25.175 -/VGA-480 640 x 480 35.00 66.67 30.24 -/APPLE MAC-480 640 x 480 37.861 72.809 31.
3ODQDU 6\VWHPV ,QF Customer Service Online Support: http://planar.custhelp.com E-mail: desktopmonitors@planar.com Tel: 1-866-PLANAR-1 (1-866-752-6271) Hours: M-F, 8am - 9pm Eastern Time © 2003 Planar Systems, Inc. 05/03 Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. Technical information in this document is subject to change without notice.