Table of Contents Preface ...............................................................................................................................1 Chapter 1 Installation........................................................................................................2 Unpacking ............................................................................................................................................. 2 Connecting the LCD Monitor and Base .......................................
Important Safety Instructions Please read the following instructions carefully. This manual should be retained for future use. 1. To clean LCD Monitor screen; -- Power off LCD Monitor and unplug the AC Cord. -- Spray a non-solvent cleaning solution onto a rag. -- Gently clean the screen with dampened rag. 2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can severely damage it. 3. Do not apply pressure to the LCD screen.
Detaching LCD Monitor from Its Stand Unscrew screws n the swivel base support column and pull downo the hinge to release. Figure 1-3 Interface for Arm Applications Before installing to mounting device, please refer to Fig.1-3. The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-4. These specifications meet the VESA Flat Panel Monitor Physical Mounting Interface Standard (paragraphs 2.1 and 2.
Chapter 2 Display Controls User Controls A brief description and the location of all LCD Monitor function controls and indicators: Figure 2-1 1 DC Power Switch 2 DC Power-On Indicator 3 4 Function Select Buttons Adjustment Control Buttons Press the power switch to switch the monitor ON/OFF. LED lights Green color --- Power is ON. LED lights Yellow --- Monitor is in "Power Saving Mode". LED is off --- Power is OFF. Press either left or right control button for OSD (On Screen Display) menu selection.
Function Description Icon Function Function Description Brightness Contrast 101 scales of brightness are available to choose from (0 to 100). 101 scales of contrast are available to choose from (0 to 100). H. Position This function let's you adjust the display's horizontal position V. Position This function let's you adjust the display's vertical position. This function let's you select the images sharpness. Five selections are available.
Chapter 3 Technical Information Specifications LCD Panel QDI CPT Size Display Type Resolution Display Dot Display Area (mm) Display Color Brightness (typical) Contrast Ratio (typical) Response Time Lamp Voltage (typical) Lamp Current (typical) Viewing Angle 17" (43 cm) Active matrix color TFT LCD 1280 x 1024 1280 x (RGB) x 1024 337.92 x 270.336 (H x V) 262K 260 cd/m2 (typical), 200 (min) 400:1 Ta=25°C Tr+ Tf=25ms 660 Vrms 7.0 mA rms. Vertical: -70° ~ +70° Horizontal: -70° ~ +70° 16.
Video Cable 1.8M with 15-pin D-sub connector Environment Operating Condition: Temperature Relative Humidity Temperature Relative Humidity Storage Condition: 5°C to 40°C/41°F to 104°F 20% to 80% -20°C to 60° C/-4°F to140° F 5% to 85% Power Supply (AC Input) Input Voltage Input Current Single phase, 100 ~ 240VAC, 50 / 60 Hz 1.2 A maximum Size and Weight 374 (W) x 394.5 (H) x 204 (D) mm 5 ± 0.3 kg 7 ± 0.
VESA-600-72Hz 800x600 VESA-600-75Hz 1024x768 XGA 1024x768 COMPAQ-XGA 1024x768 VESA-768-70Hz 1024x768 VESA-768-75Hz 1024x768 APPLE MAC-768 1152x864 (60Hz) 1152x864 (70Hz) 1152x864 (75Hz) 1280x960 (60Hz) 1280x960 (70Hz) 1280x960 (75Hz) 1280x1024VESA1024-60Hz 1280x1024VESA1024-75Hz 72.188 46.875 75 48.363 60.004 53.964 66.132 56.476 70.069 60.023 75.029 60.24 75.02 54.054 59.270 63.851 70.012 67.50 75.00 60.00 60.00 70.00 70.00 75.00 75.