Manual PLANAR 60B PDP
・Safety Precautions Power Supply - Warning AC plug should not be touched with wet hands. It may cause an electrical shock. Do not use damaged electrical cord/plug, or loose outlet. ・It can cause an electric shock or a fire. ・It can cause an electrical shock. Do not use multiple devices in an outlet at the same time to avoid the overload. ・It may cause a fire due to over heating from the outlet.
Precautions are divided into two: "W arning" and "Caution". Warning: Serious injury or fatal injury may occur, if the indicated warning is not followed. Caution: Minor injury or product damage may occur, if the indicated caution is not followed. Installation - Warning Do not place any liquid and f oreign objects on or above the PDP. ・It m ay cause an electrical shock and fire.
・Usage and Maintenance Warning During a thunder storm, please unplug the elec tric al c or ds and nev er touc h th e anten na cable. Do not insert any metal objects such as chopstick s, wires and drills into the monitor ventilator or A/V terminal. ・It can cause an electr ical shock or a fire. ・It can cause an electrical shock or a fire. When removing the batteries in the remote control, make sure that children do not eat them. Please place the batteries in a locations out of reach from children.
Notes Fixed (immovable) screen can cause permanent damage to PDP monitor 1. Video games, price tags, graphics and others can damage the screen. 2. When using simultaneous screen function, if the simultaneous screen stays on the corner of screen for a long time 3. When watching at 4:3 screen f or a long time, it can cause damage to PDP monit or. Therefore, it is recommended to use 16:9 screen. (W hen an aft erimage occurs on the screen, it can be reduced by using a screen-saver.
・Contents User Guidance Information • Safety Precaution………………………………………………………… 2 3 • Usage & Maintenance…………………………………………………… 4 5 • Contents …………………………………………………………………… 6 7 • Part Names - Front View……………………………………………………………………8 - Rear View ……………………………………………………………………9 • Options ……………………………………………………………………… 10 • Accessories ………………………………………………………………… 11 • PDP monitor installation - Wall mount Installation ………………………………………………… 12 - Desktop stand Installation …………………………………………… 13 • Remote control ………………………………………………………
• Stopping the screen ……………………………………………………… 26 • Checking the current state ……………………………………………… 26 Application • Checking the menu ……………………………………………………… 27 • Adjusting the video screen ………………………………………… 28 29 • How to adjust the size of the screen …………………………………… 30 • How to watch two screens simultaneously …………………………… 31 • How to automatically adjust ……………………………………………… 32 • how to manually adjust …………………………………………………… 33 • How to adjust the base color (color temperature) ……………… 34 35 • How to adjust sound effe
・Part Names Front View Main Power Supply (A/C Input) Button - Please turn off the main power switch if the monitor is not in use for a long period.
Rear View AudioVideo Input Terminal S-Video Terminal Component (DVD/DTV) Input Terminal (480i/480p/720p/1080i) RGB PC Input Terminal (VGA/SVGA/XGA) RS-232 Terminal (External Connection Adjustment) A/C Input Terminal External Speaker Connection Terminal (8Ω) Audio Input Terminal (S-Video L/R, Component L/R, DVI-I L/R) 9
・Options Options ※ Various options are subject to change for quality improvement of the products, without notice. ※ Please contact your dealer or the reference for purchase options.
Accessories ※ The configuration of the component s may look different f rom t he drawing contained here. RG B Cable Power Cords User 's Manual Remote Control Batter y (1.
・Installing PDP Monitor Installing wall - mount bracket ▶ Installing Wall mount PDP monitor can be installed on the wall as the picture shown above. Notes Please secure enough space for safe use. (Please refer to A and B.) If you install the monitor in any ill-ventilated locations, it can cause a fire or damage to the product due to the internal temperature of the product.
Installing desktop stand ※ This is not floor-standing unit. ▶PDP monitor can be installationed on the desk as the picture shown above. Notes Do not install in an unstable location or on a smaller support than the main body.
・Remote Control Unit ※ When 14 using the remote control, point it towards the front of the PDP monitor.
If remote control does not function 1. Check the polarity (+,-) of the batteries. 2. Check if the batteries have power. 3. Check if there is a power failure. 4. Check if the power cord is unplugged. 5. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on Loading the batteries into remote control 1. Push down while pressing the ▼ part on the cover. 2. Insert the batteries according to the right polarity (+,-). 3. Close the cover.
・Connecting VCR Connecting VCR Connecting to Composite Video terminal (R) Connect Video/Audio connection line to Composite [(yellow is for Video, white is for Audio (left), red is for Audio (right))] of PDP and Video/Audio output terminal of the video. (L) Audio Video S-Video Connecting to S-Video terminal < VIDEO > (Use S-Video connection line for better image.) Connect S-Video connection line to PDP S-Video terminal and S-Video terminal of video.
Connecting cable broadcasting receiver In order to watch cable TV, subscribe to local cable TV broadcasting company and install separate converter for cable TV. (R) Connecting to external input terminal (L) Audio Video S-Video Connect image/voice connection line to PDP external input terminal [(yellow is for image, white is for voice (left), red is for voice (right)) and image/voice output terminal of converter for cable TV.
・Connecting camcorder/ Video game ・Connecting DVD Connecting camcorder/ game machine Use after connecting the Video game in the same way as a camcorder. Connecting composite video (R) (L) Audio Video S - V i d e o Connect Video/Audio connection line to Composite [(yellow is for Videowhite is for Audio (left, red is for Audio (right)] and Video/Audio output terminal of camcorder. Connecting S-Video terminal (If the game machine contains S-image terminal.
Connecting DVD Connecting to component terminal PB Y Video PR (R) (L) Audio Connect Video connection line to PDP component terminal (Y, PB, PR) and component video output terminal of DVD. Connect audio connection line to PDP component Audio input terminal and Audio output terminal of DVD. ・You can make S-Video connection or Composite connec tion instead of connecting to component terminal. (Please refer to page 16 on connection method.
・Connecting DTV receiver Connecting to component terminal/ Connecting to RGB terminal Video RGB Y PB PR COMPONENT Audio R L R L COMPONENT RGB You should connect and use separate SET TOP BOX to receive digital broadcasting. In 1080i mode among DTV modes, the screen size does not act, but fixed to 16:9 that the screen size does not change.
Watching DTV 1.Turn on the PDP monitor and press input select 2.Use button of remote control. button to select Component and then press button. (Audio should be connected to component voice terminal.) 3.When connecting RGB terminal, use button to select Analog RGB and then press button. (Audio should be connected to DVI-I Audio terminal.) 4.Turn on DTV receiver and select the channel that you want.
・Connecting to PC Connecting to DVI-I terminal Connecting to Analog RGB terminal Insert DVI adapter into PC signal line and then connect PDP DVI-I input terminal and RGB output terminal of PC. Connect Audio connection line to PDP DVI Audio input terminal and Audio output terminal of PC. (PC Audio connection line is not included and should be purchased separately.) ※ PC Audio works only if a Sound Card is installed.
Using PC 1. Turn on the PDP monitor and press input selection 2. Use button to select Analog RGB and then press button of remote control. button. (If PC output is set to Digital, select Digital RGB.) 3. This product does not support Plug & Play function. When setting the monitor, select standard monitor type and then use it. 4. You can set PC output mode to VGA (640 X 480)/ SVGA (800 X 600)/ XGA (1024 X 768). In the mode more than SXGA (1280 X 1024), "Out of Range" message appears.
・Turning on PDP monitor ・Selecting input signal Before turning on the PDP monitor Insert the power plug. Connect external equipment properly. Please use only after carefully reading this manual. Turning on the PDP monitor First check the power connection and check the connection of external equipment. Power On/Off How to turn on PDP monitor - Press the "Main Power Button (A/C input button)" of monitor and then press the Sub-power button.
Selecting External Input. Select the required input using button and then select with button in the next menu by pressing input selection (Enter) button. If you know the input connected on the back of the monitor, you can instantly make the input selection by pressing VIDEO button, S-VIDEO button, COMPONENT button, RGB/A button, and RGB/D button on the remote control. EX) When selecting ANALOG RGB, press RGB/A button on the remote control.
・Volume - Controlling Volume・Mute - Pausing sound ・Still - Pausing the screen・Info - Checking current state ・Menu - checking the menu Volume - Controlling Volume Press button to increase volume, Press button to decrease volume. Mute - Pausing sound Press button. If you press the button again, the sound turns back on. Still - Pausing the screen Press button. If you press the button again, the screen moves again. Info - Checking current INFO Press button.
Menu - Checking the menu If input selections are "Composite", "S-Video", and "Component", the video menu is activated. If input selections are "Analog RGB" and, "Digital RGB", the computer menu activates. You should use the remote control for detailed menu item setting and change of PDP monitor. Press button. When you press the Use button, the screen appears in turn as shown in the figure. button to move to sub menu and store the setting value. Use button to move main menu.
・PSM ・User setting Adjusting video screen How to change the screen mood. Press "PSM" button. Press button repeatedly to select the desired screen. PSM" Standard Dynamic Movie Mild User Press ① Press ② Press button. button to move to the item button to enter the sub-menu. ③ Select "Picture" with ④ Select the required mode with • Standard: It is the best screen state set in the factory. • Dynamic: Select when the surrounding light is bright. You can watch it clearly.
User setting - manually setting the screen mode You may change the user setting from any mode. Press the button ① Press button move to the item ② Press button to enter the sub-menu. ③ Select "Brightness" with ④ Set the value with Press . . button to return to previous menu. User Mode • Brightness: Adjust the entire screen bright or dark. • Contrast: Adjust the difference of brightness and darkness between the object and the back- ground. • Color: Adjust the color to light or dark.
・ARC ・PIP ARC (Aspect Ratio Control) Press button. button, you can select 16:9 → Zoom1 → Zoom2 → Whenever you press panorama → 4:3. 16:9 Zoom 1 4 : 3 16:9 Zoom 2 Panorama Zoom 1 4 : 3 Zoom 2 Panorama Screen Size • 16:9 - Is the screen size that is configured to the general screen. • Zoom 1 - It is the screen size that extended the entire screen. • Zoom 2 - It is the screen size that extended the Zoom 1.
PIP (Picture In Picture) Press the button. When you press the button, you can select PIP [Large] → PIP [Small] → PBP → Normal. Press PBP button, then you can see twin picture immediately. PIP [Large] PIP [Small] PBP Normal PIP Function includes Analog R GB, Digital R GB, Composite, S-Video, and component as main screens and you can enjoy C omposite, S-video and component (480i) as sub-screens. When watching PIP, the main screen and the sub-screen can have differences in the quality of screen color.
・PC Mode Adjusting PC It is screen adjustment when input signal is Analog RGB. Auto adjustment Use this when input signal is Analog RGB and if the screen's image location is incorrect, or if shaking occurs. ① Press button. ② If the screen does not fit correctly after adjustment, execute it repeatedly. ③ In need of additional control, please control manually Please refer to page 33. Auto Adjustment supports only on Analog RGB .
User Adjustment Use this if minute adjustment is required after automatic adjustment. Press button. ① Press to move to the item . ② Press button to enter the sub menu. ③ Select "Brightness" with ④ Set the value with . . User Mode • Brightness: Adjust the entire screen bright or dark. • Contrast: Adjust the difference of brightness and darkness between the object and the back - ground. • Phase : Adjust the screen clearly if fuzziness occurs on the screen or the focus is not correct.
・Color Tone Color Tone Press button. ① Press button to move to the item ② Press button to enter the sub menu. ③ Select "Color Temp" with . ④ Select the required color among "Cool", "Normal ", "Warm ", and "User" Press button after adjustment to return to the previous menu. User Mode ・Cool: It is cold sense of color of the blue base. ・Normal: It is the sense of color of general screen base. ・Warm: It is the warm sense of color of the red base.
Color Tone (User setting) Press button. ① Press button to move to the item ② Press button to enter the sub menu. ③ Select "Color Temp" with . ④ Select "User" with ⑤ Press ⑥ Select the item to adjust with the ⑦ Press . button. . Adjust the setting value with the button. button after adjustment to return to the previous menu.
・SSM ・Equalizer SSM (Sound Stauts Memory) To listen to the selected sound Press button. Select according to the mood by repeatedly pressing the Standard Music button. Movie User Press ① Press button. button to move to the item ② Press the ③ button to enter the sub menu. Select "Mode" with . ④ Select the required mode with the Press button. button after adjustment to return to the previous menu. ・Standard: It is the sound state to generally meet every genre.
Equalizer Ajustment is available regardless of the state of the sound mode and will be stored as the user's mode. Press button. ① Press button to move to the item ② button on the left. Press ③ Select equalizer with ④ Press the button, then the equalizer menu shall appear. ⑤ Select the required menu with the and adjust the setting value with Press . button after adjustment to return to the previous menu. User Mode ・Volume: It adjusts the sound volume.
・AVL ・Stereo AVL (Auto Volume Leveler) It is the function to similarly adjust the different volume of each broadcasting company. Press ① Press button to move to the item ② Press button to enter to sub menu. ③ Select "AVL" with ④ Select "On" with the Press 38 button. . button after adjustment to return to the previous menu.
Stereo (How to set stereo) For regions with poor radio reception(weak frequency), the sound state can be poor (staticy) when selecting a channel. Set the stereo setting to "Mono" in such case. Press button. ① Press button to move to the item ② Press button to enter to sub menu. ③ Select "Stereo" with ④ Select "Stereo" with Press button after adjustment to return to the previous menu.
・Reset ・Languages Reset Use the existing adjusted values for initiation as they were set in the factory. Press the ① ② Press button. Press button to move to the item button to enter to sub menu. ③ Select "Reset" with Initialize by pressing Press button. button after adjustment to return to the previous menu. ※ All the values that the user adjusted are initialized to the values set in the factory.
Language Use this when the user selects the language from the menu indicated on the screen. ① Press button. Press button to move to the item ② Press button to enter to sub menu. ③ Select "Language" with ④ Select the desired language with Press button after adjustment to return to the previous menu.
・Trasparency ・White Wiper Trasparency Use this to change the base of the menu to transparent and opaque. Press ① Press button to move to the item ② Press the ③ Select "Half tone" with ④ Select "On (transparent)" or "Off (Opaque)" by press the Press 42 button. button to menu to sub menu. button after adjustment to return to the previous menu.
White Wiper (How to set panel protection function) Caution: An afterimage may be left on the screen if you watch at 4:3 f screen rate or with a paused/ frozen screen for a long time. ※ The function does not perfectly prevent the afterimage that occurs when the fixed screen continues for long, due to the feature of the panel. (Please refer to page 5.) Press button. ① Press button to move to the item ② Press button to enter to sub menu..
・Current Time Setting ・Time Setting Current time setting ( How to set the current time) You can set the time to automatically turn on/off if you set the current time. Current time acts only when the main power button of the monitor is pressed. To maintain this function, use the sub- power button or power button of remote control. Press ① Press button button to move to the item ② Press ③ Select "Current Time" with button to enter to sub menu. Move to "Hour" with button on the right.
Time setting Current Time should be set first for this setting. Current Time acts only when the main power button of monitor is pressed. To maintain this function, use the sub power button or power button of remote control. Press button. ① Press button to move to the item ② Press button to enter to sub menu. ③ Select "On Time" or "Off Time" with Move to "Hour" with button on the left.
・On Time Volume Setting ・Sleep Time Setting On Time Volume Setting (How to set the volume when it is turned on) Current Time should be set first for this setting. Current Time acts only when the main power button of monitor is pressed. To maintain this function, use the sub- power button or power button of the remote control. Press button. ① Press button to move to the item ② Press button to enter to sub menu..
Sleep time setting (How to make automatically turn off when you sleep) Set the desired time to make it automatically turn off. Press button. Whenever you press the "Sleep" button, you can select "Sleep Timer off" → "Sleep timer: 15" → "Sleep timer: 30" → "Sleep timer: 60" → "Sleep timer: 90" → "Sleep timer: 120".
・Trouble Shooting Take the following steps first and if you still have the same problem, turn off the power and contact an authorized service center. • Screen related Matters Problem Action The screen does not appear Is the power plug pulled out? Insert the power plug. Turn the main power button on and press the power button of the remote control. The screen appears too slowly after the power is turned on.
• Sound related Matters Problem Action Screen appears, but there is no sound 1. Press the button gently. 2. Increase the sound by pressing volume adjustment button. 3. Check if voice terminal of external input is connected properly. 4. Check if speaker line is inserted properly. 5. If it is PIP mode, convert voice of main screen and sub-screen by pressing S/SWAP button. 6. Select and check the other input.
・Trouble Shooting ・Supporting Display Mode • Others 50 Problem Action Remote control does not work. 1. Check if main power button of PDP monitor is pressed. 2. Check if the batteries of the remote control were loaded properly. 3. Check if any obstacle exists between the monitor and the remote control and remove it, if any. 4. If the batteries have no power, replace them with two new batteries. PDP monitor makes strange sounds.
Supporting Display Mode It is optimal screen when the resolution is 1024 x 768. Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 640×350 640×400 720×400 640×480 800×600 832×624 (MAC) 852×480 1280×1024 31.469 37.861 37.927 31.469 37.927 31.469 35.000 37.861 37.500 43.269 45.913 53.011 64.062 35.156 37.879 48.077 46.875 53.674 56.000 64.016 49.725 29.820 36.072 37.650 42.925 48.363 56.476 60.023 68.677 70.09 85.08 85.03 70.08 85.03 59.94 66.66 72.80 75.00 85.00 90.03 100.04 120.00 56.
・Specifications ・User Information Component Mode (Y, CB/PB, CR/PR) Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 640×480 15.73 60.00 SDTV, DVD 480i 640×480 15.63 50.00 SDTV, DVD 480i 704×480 31.47 59.94 SDTV, 480p 1280×720 45.00 60.00 HDTV, 720p 1280×720 44.96 59.94 HDTV, 720p 1920×1080 33.75 60.00 HDTV, 1080i 1920×1080 33.72 59.94 HDTV, 1080i Specifications 16:9 Aspect Ratio Screen Size (H ×V) 1 3 1 7 . 1×7 4 3 m m 1 2 8 0×7 2 0 Resolution 0.337(H)×1 .
USER INFOMATION Note: This equipment has been tested and found to comply with the limit for a Class B digit al device, pursuant t o part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when t he equipment is operated in a commercial environmental. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.