PLN2700 LED LCD Monitor USER'S GUIDE www.planar.
Content Operation Instructions ...................................................................................................................... 1 Unpacking Instructions ..................................................................................................................... 3 Safety Precautions ............................................................................................................................ 3 Consignes de sécurité .................................................
Operation Instructions Thank you for purchasing the PLN2700 monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED LCD Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation.
COMMUNIQUE D'AVERTISSEMENT DE LA FCC CONCERNANT LES INTERFERENCE DE FREQUENCE RADIO: (SEULEMENT POUR MODELES CERTIFIE PAR LA FCC) Ce moniteur a été testé et à été trouvé conforme aux limites pour un appareil numérique de Class B, suivant la partie 15 des règlements de la FCC. Ces limites ont été développées pour offrir une protection satisfaisante contre les interférences nuisibles dans une installation résidentielle. Ce moniteur génère, utilise et peut radier de l'énergie de fréquence radio.
Unpacking Instructions Remove the LED LCD Monitor out of the package and take off EPE Foam. Remove stand and base from EPE Foam and attach to base. Adjust the display between -5° and 15°. Safety Precautions Follow all warnings, precautions and maintenance as recommended in this user's manual to maximize the life of your unit. DO : Turn off the product before cleaning.
Consignes de sécurité Respectez tous les avertissements, les précautions et conseils d'entretien recommandés dans ce manuel de l'utilisateur pour maximiser la durée de vie de votre appareil. A faire: Éteindre le produit avant de le nettoyer. La surface de l'écran tactile peut être nettoyée avec un chiffon doux et propre imprégné d'un nettoyant doux du commerce pour vitres ou d'un mélange à 50/50 d'alcool isopropylique et d'eau.
Package Overview LED LCD Monitor Stand Base HDMI Cable Power Cord User's Guide 5
First Setup Install the Stand Base 1. 2. 3. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the LED LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set. Insert Stand into the monitor, then plug in Base to Stand to secure, as shown below.
Disconnecting the Stand Base 1. 2. 3. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the LED LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set. Press the release button and pull away the monitor to remove the stand from the monitor. Pull the release lever and pull away to remove base from stand.
Front View of the Product 1 23 4 56 The symbols on the front correspond to the buttons on the back. 1 Menu / Exit 2 Brightness / Down 3 Blue Light Reducer / Up 4 Input select / Enter 5 Power On / Off 6 LED Indicator *Hot keys Instructions please see "Basic Operation" on page11-12.
Rear View of the Product 1 1 Power Input (AC input) 2 HDMI Input (HDMI 19 pin) 3 VGA Input (VGA 15 pin) 4 Audio Output (EARPHONE) 5 Kensington Lock 9 2 3 4 5
Quick Installation 1. 2. 3. 4. Connect either HDMI or VGA Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. Please note the monitor ships with an HDMI cable only. Connect the power cord to a properly grounded AC outlet, then to the monitor. Power-ON computer and then POWER-ON the monitor. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920x 1080@60Hz.
Basic Operation Before using the LED LCD Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD Monitor on/off: Press button on the back. The power LED indicator light will be blue when the LED LCD Monitor is on. Using the OSD Menu Use OSD menus to adjust settings by using the menu button on the front of the LED LCD Monitor.
OSD lock out Function When LED LCD Monitor is on and the OSD menu is not activated, the “Lock Out” function can be enabled. Option 1: OSD lock-all 4 buttons are locked except the “POWER” button. Press and hold the button for 5 seconds to lock the OSD buttons. The LED LCD Monitor will show an “OSD locked” message for 5 seconds and the message will disappear automatically. OSD LOCKED Repeat this step to unlock. Option 2: OSD & Power button lock-all 5 buttons including the “POWER” button are locked.
OSD Menu BRIGHTNESS BRIGHTNESS: Adjust backlight levels Adjust between 0-100. CONTRAST: Adjust contrast levels Adjust between 0-100. PICTURE MODE : Select from preset modes Standard, Movie, Game, Text. OD: Turn Overdrive on or off ON/OFF. BLUE LIGHT: Reduces blue light OFF: Video (15% reduction), Web Browsing (30% reduction), Reading (50% reduction), Low Light(70% reduction).
IMAGE H. POSITION: Adjust contrast levels Adjust between 0-100. V. POSITION: Adjust contrast levels Adjust between 0-100. CLOCK: Adjust contrast levels Adjust between 0-100. PHASE: Adjust contrast levels Adjust between 0-100. ASPECT : Select aspect ratio Wide, 4:3.
COLOR TEMP COLOR TEMP : Choose color temperature User, Warm, Normal, Cool Under USER, the following colors can be adjusted R: Red 0-100 G : Green 0-100 B : Blue 0-100 15
OSD SETTING LANGUAGE : Choose language English, French, German, Italian, Spanish, Finnish, Japanese, Simplified Chinese, Traditional Chinese OSD H. POS : Adjust horizontal position of OSD 0~100 OSD V.
RESET IMAGE AUTO ADJUST: Adjust display automatically (Only available in VGA input).
MISC SIGNAL SOURCE : Select Input source HDMI, VGA VOLUME : Adjusts volume of earphone 0-100 18
Supporting Timing Modes STANDARD RESOLUTION VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 768 @ 75Hz VESA 1280 x 720 @ 60Hz VESA 1280 x 800 @ 60Hz VESA 1280 x 1024 @ 60Hz VESA 1280 x 1024 @ 75Hz VESA 1440 x 900 @ 60Hz VESA 1440 x 900 @ 75Hz VESA 1680 x 1050 @ 60Hz VESA 1920 x 1080 @ 60Hz Note: HDMI supports 48
Technical Information Panel 27" TFT (with LED backlight) Power Management Normal On: 18 Watts (typical), 28 Watts (maximum) Standby Mode: < 0.5Watt Off: < 0.3 Watt Displayable Resolution FHD 1920x1080 max Pixel Dimension 0.31125(H)x0.31125(V)mm Display Color 16.7M Tilt -5° ~ 15° Active Display Area 597.6mm x 336.
Wall-Mount Installation Instructions Attaching The Optional Wall Mount Arm (not supplied) Follow these steps to finish installing the wall mounting arm: 1. Place the wall mounting arm onto the back of the LED LCD Monitor. Line up the holes of the arm with the holes in the back of the monitor. 2. Insert the 4 screws into the holes and tighten. 3. Reconnect the cables. Refer to the User's Guide that came with the optional wall mounting arm for instructions on attaching it to the wall.
Care and Maintenance Care Avoid exposing your LED LCD monitor directly to sunlight or other heat source. Place your LED LCD monitor away from the sun to reduce glare. Put your LED LCD monitor in a well ventilated area. Do not place any heavy things on top of your LED LCD monitor. Make certain your LED LCD monitor is installed in a clean and moisture-free area. Keep your LED LCD monitor away from magnets, motors, transformers, speakers and TV sets.
Planar Support Cables and Accessories To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com. Technical Support Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers, warranty information and access to Planar's Technical Library for online trouble shooting.
Planar Systems, Inc. Customer Service 24x7 Online Technical Support: http://www.planar.com/support 1195 NE Compton Drive, Hillsboro, OR 97006 Tel: 1-866-PLANAR1 (866-752-6271), or + 1 503-748-5799 outside the United States, Hours: 24 hours a day, 7 days a week © 11/2021 Planar Systems, lnc. Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. Technical information in this document is subject to change without notice.
