PT191MU Touchscreen Monitor USER’S GUIDE www.planar.
The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be reproduced, translated to another language or stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission. Windows® is a registered trademark of Microsoft, Inc.
Table of Contents Usage Notice Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Introduction About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Package Overview . . . . . . . . . . . . . . . . . . .
Usage Notice ! WARNING – To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. ! WARNING – Please do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. Do: q Turn off the product before cleaning. q Use only a dry soft cloth or clean room wiper when cleaning the LCD panel surface.
Introduction About Planar’s PT191MU The PT191MU is a 19” flat panel screen with an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). Features include: q Analog and Digital dual signal input q 19” diagonal screen size q 1280 x 1024 high resolution q 16.7 million displayable colors q 31.5~80kHz horizontal scan q 56~75 Hz high refresh rate q 0.294 mm x 0.294 mm pixel pitch q 300 cd/m2 (typ.) brightness q 4 CCFT backlight lamps w/ 50,000 hrs life q 1000:1(typ.
Touchscreen for PT191MU q Surface: Anti-glare treatment q Interface: USB q Durability: Capacitive: 225 million activations q Hardness of surface = Capacitive: 6.5 Mohs q Transmittance: Up to 91.
Package Overview LCD Display Power Adapter Power Cord VGA Signal Cable DVI-D Cable Audio-In Cable USB Upstream Cable User’s Guide Landing Strip Touchscreen Driver Installation CD-ROM PT191MU User’s Guide (020-0418-00 B) 7
Installation Product Overview • Front View LCD Display Stand • Rear View 8 PT191MU User’s Guide (020-0418-00 B) Front Panel Controls
• USB Hub Ports 1. USB Downstream Ports These two USB ports are available for connecting USB type peripheral devices such as keyboard, mouse, printer and so on. 2. USB Upstream Port This Port is for connecting the USB Upstream cable to computer’s or other hub’s USB port.
• VESA Mount your monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface Standard which defines a physical mounting interface for flat panel monitors, and corresponding standards for flat panel monitor mounting devices, such as wall and table arms.The VESA mounting interface is located on the back of your monitor. To mount the monitor on a swing arm or other mounting fixture, follow the instruction included with the mounting fixture to be used.
Start Your Installation • Connecting the display (Figure 1.1) To setup this display, please refer to the following figure and procedures. 1. Be sure all equipment is off. 2. Connect the DC power cord to the power connector. Plug one end of the AC power cord into the power adapter, and the other end into an electrical outlet(1). 3. For the PC with Analog output: connect the VGA signal cable from display VGA input connector to the 15-pin connector of your host computer and tighten the screws(2). 4.
Figure 1.
User Controls Front Panel Controls MENU Menu button To pop up the OSD menus. SELECT/AUTO Select/Auto Select- To select the adjustment items from OSD menus. Auto- To activate the “Auto Adjustment” function to obtain an optimum image. Brightness Minus/Minus 1. Decreases the brightness of the display image. 2. Decreases value of the adjustment items. Brightness Plus/Plus 1. Increases the brightness of the display image. 2. Increases value of the adjustment items. Power LED 1.
How to Use the OSD Menus 1. Press the “MENU” button to pop up the on-screen menu and to select between the four main menus. 2. Choose the adjustment items by pressing the “SELECT/AUTO” button. 3. Adjust the value of the adjustment items by pressing the “|” or “}” button. 4. Once you don’t operate the OSD menus after a pre-set time, the OSD menus will automatically disappear. 5. To disable the OSD menu buttons, please follow the instructions below.
On-Screen Display Menus First OSD Menu: } Auto-Adjustment* Choose this function to obtain an optimum image. } Contrast Adjusts the contrast of the display image. } Horizontal Position* Changes the horizontal position of the image. } Vertical Position* Changes the vertical position of the image. } Clock* Changes the display data frequency to match the frequency of your graphics card. When you are experiencing vertical flickering bar, use this function to make an adjustment.
On-Screen Display Menus Second OSD Menu: } Display Mode Selects this function to demonstrate the display resolution, vertical refresh, and horizontal scan of the current mode. } OSD Off-Time Adjusts the time period for OSD menu disappear. } Language Chooses the language you need. } Sharpness Adjust the sharpness of the image. } Reset Returns the display parameters of the current mode to its factory default settings.
On-Screen Display Menus Third OSD Menu: } Volume It allows you to control the volume sound. } Mute It allows you to disable the sound immediately. } Input Select It allows you to change the video mode between multiple connections.
On-Screen Display Menus Fourth OSD Menu: } Color Setting Adjusts the color temperature. } Color Adjustment-Red It allows you to adjust the red color of the display. } Color Adjustment-Green It allows you to adjust the green color of the display. } Color Adjustment-Blue It allows you to adjust the blue color of the display.
Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. } Check that all the I/O and power connectors are installed correctly and well connected as described in the “Installation” section. } Make sure the pins of the connectors are not crooked or broken. Problem: Partial image or incorrectly displayed image.
Warning Signal Sometimes you probably will see the warning messages from this LCD screen. This means that the LCD display cannot exactly receive the signal from the computer graphic card. There are three kind of situations may happen. Please check with the connected cables or contact your local dealer for more information. } No Signal This message means that the LCD display has been powered on but it cannot receive any signal from the computer graphic card.
Product Dimensions PT191MU User’s Guide (020-0418-00 B) 21
Compatibility Modes Resolution V.Frequency (Hz) H.Frequency (kHz) IBM VGA 640 x 350 70 31.5 IBM VGA 640 x 400 70 31.5 IBM VGA 720 x 400 70 31.5 IBM VGA 640 x 480 60 31.5 VESA VGA 640 x 480 72 37.9 VESA VGA 640 x 480 75 37.5 VESA SVGA 800 x 600 56 35.2 VESA SVGA 800 x 600 60 37.9 VESA SVGA 800 x 600 72 48.1 VESA SVGA 800 x 600 75 46.9 VESA XGA 1024 x 768 60 48.4 VESA XGA 1024 x 768 70 56.5 VESA SXGA 1024 x 768 75 60.0 VESA SXGA 1280 X 1024 60 64.
Touchscreen Driver Installation Driver Installation for PT191MU: Capacitive Touchscreen with USB Connection. Touch driver information is located on the enclosed CD-ROM for the following operating systems: Microsoft Windows® XP, Windows 2000, Windows NT 4.0, Windows Me, and Windows 9X and Linux. Disconnect the USB Cable between the display and PC before installing the Driver. 1. Open the CD-Rom. 2. Select the link for your monitor model and PC operating system you are using for either Windows or Linux. 3.
Planar Systems, Inc. Customer Service 24x7 Online Technical Support: http://www.planar.com/support 1195 NW Compton Drive Beaverton, OR 97006-1992 Tel: 1-866-PLANAR1 (866) 752-6271 (US only) 1-503-748-5799 (outside the US) Email: PlanarSupport@planar.com Hours: M-F, 5am - 5pm Pacific Time © 2006 Planar Systems, Inc. 11/06 Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners.
