2+ Router User's Manual

3.3.2 DHCP Server Settings

Enable the DHCP Server if you are using this device as a DHCP server. This page lists the

IP address pools available to hosts on your LAN. The device distributes numbers in the pool

to hosts on your network as they request Internet access.

You can setup DHCP server to assign IP address to your PC automatically. You can also

manually assign an IP according to the MAC address of PC’s network card. The ADSL

Router supports DHCP Relay and Server mode, or select Disable to disable the DHCP

Server.

IP Pool Range: Enter the start IP and end IP address you wish to use as the DHCP server's

IP assignment.

Max Lease Time: Enter the amount of time you wish to lease out a given IP address.

Domain Name: Enter your domain name.

Gateway Address: Enter the default gateway IP address. Default is the LAN IP address.

Note: Please Commit/Reboot if you want to make this settings effective immediately

MAC-Base Assignment: Click this button will pop-up a new window to assign IP address

according to MAC address.