User Manual
CONTROL PANEL BUTTON LOCATIONS
4
OPERATION
1 . Turn Unit on/off (PWR)
Press any button to turun on the unit. Press and hold the VOL/PWR/SEL button to turn off the unit.
Adjust the volume (VOL)
Rotate the VOL knob to increase or decrease the volume level.
Adjust Menu Options (SEL)
Press SEL button repeatedly to cycle through the following adjustable audio functions: BASS, TREBLE,
BALANCE, FADER, EQ OFF, CLASS/ROCK/POP/ FLAT, LOUD ON/OFF, DX/LOC, STEREO/MONO,
CLOCK 12/24, AREA US/EU.
- BASS: -7,-6, ~,-1, 0,+1,~, +6, +7
- TREBLE: -7, -6, ~, -1, 0,+1,~, +6,+7
- BALANCE: L7, L6,~, L1, 0, R1,~,R6,R7
- FADER: R7,R6,~, R1,0,F1,~,F6,F7
- EQ(Equalizer) Setting: OFF, CLASS, ROCK, POP, FLAT
- Loudness: LOUD ON/OFF
- DX/LOCAL: Enables or disables the local broadcast mode (LOCAL).
- Stereo/Mono: Switches between MONO and STEREO reception mode for radio frequencies.
- CLOCK 12/24: Select between 12 hours and 24 hours display.
Note: If 12 hour display is selected , AM= Morning; PM= Afternoon
- AREA US/EU: This car radio is equipped the USA / Europe frequency.
Rotate the volume knob to switch between USA and Europe frequency.
The system will change the frequency setting in about 3 seconds.
5RWDWHWKH92/NQREto adjust the selected item.
2. 3. Manual Tuning / Auto Seek
In the radio mode:
Press and hold the or button to enter the manual tuning mode. In manual tuning mode, briefly
press the or button to search the next or previous frequency step by step.
Press the or button, the automatic search will start, it will search upward or downward for the
strong signal radio station within the cuttent band. The auto searching will stop until find a station.
Next/Previous Track; Faste Forward/Backward
In the USB or SD card mode:
Briefly press the or button to play the the next or previou track.
Press and hold the or button to fast forward or fast backward.