Owner's Manual

BEFORE INSTALLING THIS PRODUCT
A
RISKOFELECTRICSHOCK
A
To
avoid
potential
shorts
in
the
electrical
system, be sure to disconnect
the
(-)
battery
cable
before
installation.
Use this unit with a
12-volt
battery and
negative grounding
only. Failure
to do so
may result
in
a fire or
malfunction.
~
DONOT<WEN
....
CAliTION:
TO
REDUCE
THE
RISIC
Of
ElfCTHIC
SHOCK.
DO
NOT
REMOVE
COYER
(OR
SAO()
.
NO
USER
-
SUMCEABI..E
PARTS
INSIDE.
REFER
SERVICING
TO
QUALIFIED
SERVICE
PfASONNE
L
When replacing
the fuse, be sure to
only use a fuse
of
the
rating specified on this product.
To
avoid short-circuiting, cover any disconnected leads
with
insulating tape. It
is
especially
important to insulate
any unused wires, which if
left uncovered may
cause a short circuit. When connecting other devices to this product, refer to the
manual
for the product to be connected. The
black cable
is ground, make
sure to
connect the ground wire first.
Ensure that the ground
cable is properly
connected to
metal
parts
of
the
vehicles
body frame or direct to the battery if your
vehicle does not have a grounded
chassis frame The ground
cable
of
this units power amp and a second powered
system must be connected to the frame
separately
with different screws.
If
the
screw for the ground wire
loosens
or
falls
out, it
could result
in fire or
malfunction.
(~
_____
TE_C_H_N_I_C_A_L_S_U_P_P_O_R_T
_____
)
1.805.
751.4854
www.planetaudiousa.com/technical-support
TOOLS NEEDED:
- Wrench and/or Pliers
- #2
PhiUips
screwdriver
-Crimp
tool
-
Electrical
tape