Owner's Manual

I
BLUETOOTH OPERATION
* ·ll ))
PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION
1) Power on the PATV65 by pressing and holding down the (j) Power button for
3 seconds, the
®BLUE and @RED LEOs will start to alternately flash,
signalling that the PATV65 is now ready for Bluetooth pairing.
NOTE: You have 2 minutes before you must restart this procedure over again.
2) Now that the
PATV65 is in pairing mode:
ANDROID users:
a. Go into the Settings Menu of your device
b. Enter the Bluetooth Menu and press SCAN
c. "Planet Audio" will now be display under AVAILABLS DEVICES
d. If prompted, enter passcode: "0000"
iOS users :
a. Go into the Settings Menu of your iOS device
b. Enter the Bluetooth Menu
c. "Planet Audio " will now be displayed
d. If prompted, enter passcode:
" 0000 "
3) If Planet Audio is not seen, repeat the above steps to refresh the " Device List"
4) When the connection is successful the BLUE LED will be ON, you are now ready to
stream music from your devices favorite media player to the
PATV65
•
Pl<.111~t l~ucJio "