User Manual

7
ENGLISH
PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION
1) Power on the PATV65 by pressing and holding down the
7
Power button for
3 seconds, the
9
BLUE and
8
RED LEDs will start to alternately ash,
signalling that the PATV65 is now ready for Bluetooth pairing.
NOTE: You have 2 minutes before you must restart this procedure over again.
2) Now that the PATV65 is in pairing mode:
ANDROID users:
a. Go into the Settings Menu of your device
b. Enter the Bluetooth Menu and press SCAN
c. “Planet Audio” will now be display under AVAILABLE DEVICES
d. If prompted, enter passcode: “0000”
iOS users:
a. Go into the Settings Menu of your iOS device
b. Enter the Bluetooth Menu
c. “Planet Audio” will now be displayed
d. If prompted, enter passcode: “0000”
3) If Planet Audio is not seen, repeat the above steps to refresh the “Device List”
4) When the connection is successful the BLUE LED will be ON, you are now ready to
stream music from your devices favorite media player to the PATV65
BLUETOOTH OPERATION
7
Tips:
EN
Nyne Cruiser
USB CHARGE
5V 1A
Tips:
EN
Nyne Cruiser
USB CHARGE
5V 1A
89