User Manual

12
ENGLISH
TROUBLE SHOOTING GUIDE
TROUBLE CAUSE SOLUTION
Unit will not turn on
The fuse is blown Check / replace the fuse
Bad accessory power
connection
Check accessory power port for
proper operational voltage
No sound is heard
Blown speaker Replace faulty speaker
Volume is low / muted Press the volume level up
Device is paused or muted
Check your devices playing /
volume status
Cannot pair Bluetooth
The Bluetooth function of the
device is not enabled
Refer to the user manual of the
device for how to enable the
Bluetooth function
The PATV65 memory is full
Turn o the last paired device
BLUETOOTH
The audio quality is poor
after connection with a
Bluetooth enabled device The Bluetooth reception is poor
Move the device closer to the
audio system or remove any
obstacle between the device
and the systems antenna
Unit has become
unresponsive Power glitch or interference
Disconnect power for
10 seconds to reset
SPECIFICATIONS
BLUETOOTH
• Version: 3.0 w/ EDR
• A2DP
• Range: 33ft (10m) Class 2
SPEAKERS
• Dimensions: 6.5”
• Impedance: 4Ω
• Cone Type: PP CARBON + RUBBER SURROUND
• Tweeter Size: 1” PEI SOFT DOME
AMPLIFIER
• Maximum Output Power: 450 Watts
• Input impedance: 10kΩ
• Frequency Response: 45Hz-25kHz
12.67"
28.50"
7.95"
CHASSIS
• Weight: 14.5lbs / 6.58Kg
• Unit Dimensions cm HxDxW: 20.2 x 32.2 x 72.4
• Unit Dimensions Inches HxDxW: 7.95 x 12.67 x 28.50
• Controller Dimensions HxDxW:
1.00”x3.22”x3.22” / 25.2mm x 80.1mm x 80.1mm
• Controller cable length: 6ft / 2m
• Quick connect Molex power harness
GENERAL
• Operational Power: 14.4VDC (10.8V ~ 16V allowable)
• Grounding System: Negative type
• MAX Current Draw: 13.7A
• Replacement Fuse: 15A AGC TYPE
• 3-way protection circuitry (thermal, overload, and speaker
short protection)
• Color: Black
• Storage Temperature: 5
o
F to 113
o
F / -15
o
C to 45
o
C
• Operation Temperature: 14
o
F to 140
o
F / -10
o
C to 60
o
C
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE