User Manual

10
BLUETOOTH OPERATION
Pair and Connect
Make a Call
DEL
Redial Last Dialed Number
Answer a Call
Reject a Call
End a Call
Switch Audio Between Car Audio and mobile Phone
VOL
Adjust Call Volume
VOL
MUTE
Audio Streaming (A2DP)
SRC
Prior to using the Bluetooth device as a handsfree system for a Bluetooth-enabled mobile
phone for the first time, you must pair and connect the two devices as follows:
1. In any mode, prior to pairing and connecting, the BT logo in the LCD indicating that no
device is connected. To begin pairing, enable BT mode on your mobile phone.
2. When the phone finds the car audio system, the “PLANET PB455RGB” will be displayed.
3. Choose the “PLANET PB455RGB” from the device list to pair and connect with the car audio
system. Upon confirming, the BT logo will stop flashing.
4. When pairing is complete, the mobile phone audio will automatically transfer to the car
audio system whenever a call is made or received, or when the mobile phone plays music.
 To make a call, dial the call directly from the paired mobile phone.
 To make a call with this bluetooth handsfree system:
a) When linking up the Bluetooth-enabled mobile phone to this bluetooth handsfree system,
press the button
to access the dial telephone number mode, then press the “0~9”, *
and # button on remote control to input the telephone number, and the entered number
will be shown on the LCD display.
b) If a number has been incorrectly inputted, press the button or button to delete it.
c) Press the button to make outgoing call.
Press and hold the button on the control panel to redial the last dialed phone number.
 When the mobile phone is called, the incoming telephone number displays on the LCD.
 To receive the call, press the button on the control panel.
To reject the call, press the button on the control panel.
To end an active call, press the button.
During a call, press the knob/button to switch the audio source from the car audio system
back to your mobile phone.
 During a call, use knob or button to adjust the call volume level.
 Use the button to mute sound.
The unit supports A2DP (advanced audio distribution profile) wireless streaming audio from
your Bluetooth mobile device directly to your head unit. You can also control your music from
the front panel of the head unit using AVRCP (audio video remote control profile).
1. Afte
r pairing, connecting and enabling streaming audio from a compatible mobile device,
press the button to enter BT mode and display pause in the LCD display.
2. When a mobile device is paired, music played through that device will automatically be
heard through the car audio system and display A2DP in the LCD display.
3. Press the or button to play the next or previous on the mobile phone.
4. Press the button to pause or resume music playback.
VOL+ VOL-/