CONTENTS Precautions..................................................................................................................1 How to Handle Discs...................................................................................................1 Precautions and warnings...........................................................................................1 Lithium Battery Cell Warnings.....................................................................................1 Installation...........
PRECAUTIONS How to Handle Discs • • • • Handle a disc by its edges. Do not touch the playing side. Before inserting a disc, wipe the disc outward from the disc center with a clean, soft, dry and lint-free cloth. Do not use solvents or thinners such a petrol/benzene or cleaners. After removing a disc from the disc slot, place the disc in a sleeve or case to keep it clean and prevent scratches. Do not stick paper or tape on the disc surface.
INSTALLATION Prepare Radio 1. 2. Before you begin, disconnect the battery negative terminal. Remove the transport screws. 3. Remove chassis from the mounting sleeve. BRACKET KEY BRACKET KEY PLASTIC TRIM OUT If you want to remove the chassis from the mounting sleeve, remove the plastic trim out from both sides. Next, insert the two bracket keys into the left and right side of the chassis, as illustrated, to separate the chassis from the housing.
INSTALLATION (CONT.) INSTALLATION DIAGRAM DASH BOARD HEX NUT METAL MOUNTING STRAP SPRING WASHER PLAIN WASHER TAPPING SCREW CONSOLE MOUNTING SLEEVE HEX BOLT Wiring Connections F-L R-L AUX-R F-R R-R 10A AUX-L ANT 1. AUX-L: AUX Input - Left CH (White) 2. AUX-R: AUX Input - Right CH (Red) 3. FL: Front Left PRE-AMP Output (White) 4. FR: Front Right PRE-AMP Output (Red) 5. RL: Rear Left PRE-AMP Output (White) 6.
CONTROL PANEL BUTTON LOCATIONS 1. (power), SRC (source) button (Push-To-Talk) button, SEL (select/menu) button 2. Volume knob, 3. AMS (automatic store / preset station scan, automatic music search) button 4. (pause/play), Preset station1 button 5. INT (intro) , Preset station 2 button 6. RPT (repeat) , Preset station 3 button 7. RDM (random) , Preset station 4 button 8. -10(previous 10 tracks) , previous folder), Preset station 5 button 9. +10(next 10 tracks) , next folder), Preset station 6 button 10.
GENERAL OPERATION Turn Unit On/Off • Press any button on the front panel or on the remote control to turn on the unit. • Press and hold the power ( ) button on the front panel or briefly press the power ( remote control to turn the unit on or off. Adjust Volume (VOL) Rotate the VOL knob on the front panel or press the VOL control to increase or decrease the volume level.
GENERAL OPERATION 2. To set clock time, press and hold the CLK button and the hour will flash. 3. Rotate the VOL knob to adjust the hour. 4. Press the CLK button on the front panel and the minutes will flash. 5. Rotate the VOL knob to adjust the minute. Change the Source (SRC) Press the SRC button to switch between RADIO, DISC(with a CD/MP3 disc inside the disc slot), USB(with USB device inserted), BT(Bluetooth), and AUX-IN(auxiliary input) modes.
RADIO OPERATION Switch Between USA area and Europe area Frequency In radio mode, press and hold the volume knob to enter settingmenu, then press the volume knob repeatedly to access the state of the USA and Europe frequency, then rotate the volume knob to switch between USA and europe frequency. The system will change the frequency setting in about 3 seconds. Change Bands (BAND) Press the BAND button to switch between the FM1, FM2, FM3, AM1 and AM2 bands. Each band stores up to six preset stations.
DISC/USB OPERATION To insert DISC / USB • To play files on a disc, insert a disc with the label surface facing upward into the disc slot. Playback will begin automatically. Label Surface Up • To play files in a USB device, open the USB port cover, then insert a USB device into the USB port. Playback will begin automatically. Eject Disc/USB • To eject a disc, press the (eject) button to eject the disc and then remove it. • Remove the USB device to eject a USB device.
DISC/USB OPERATION Select the track or file for playback in MP3 format During CD, USB playback, press and hold the AMS button to enter the track search modes: a) Press the AMS button to enter track search mode. b) Rotate the VOL knob to select the number of your favorite track with high speed. You can also press the numerical keys on the remote control to select a specific track by its serial number. c) When the desired track number appears, confirm your selection by pressing the SEL button.
BLUETOOTH OPERATION Disconnect or reconnect the bluetooth connection Press and hold the button to disconnect or reconnect the bluetooth connection. Answer a Call • When the mobile phone is called, the incoming telephone number displays on the LCD display. • To receive the call, press the button on the front panel. Reject or End a Call To reject or end the call, press the button. Redial Last Dialed Number Press the button to redial the last dialed phone number.
REMOTE CONTROL (CONT.) Remove Insulating Sheet The remote control comes with an insulating sheet attached to the underside of the remote control, as illustrated on the right. The remote control will not work until the insulating sheet is removed. Replace Lithium Battery Cell 1. When the lithium cell battery becomes weak, replace it as illustrated on the right. 2. Press and hold the movable block in the direction indicated by arrow 1.
TROUBLESHOOTING Symptom Cause Solution No Power Car ignition not on Switch ignition key to “ACC” Fuse blown Replace fuse Disc cannot be loaded Another disc is already in the Eject disc and insert new player one Disc cannot be read Disc was inserted upside down Insert disc with label facing upward Disc is dirty or scratched Clean the disc or try to play a new one Temperature inside the car is too high Allow vehicle to cool before using player Volume turned down Adjust volume to desired leve
SPECIFICATIONS General Chassis Dimensions....................................................................7.0(W) x 6.3(D) x 2.0(H) inches Power Supply Requirement .............................................................................................DC 12V Current Consumption ..................................................................................................10A (max.) Maximum Power Output .............................................................................................
