User Manual

Label Surface Up

DISC/USB OPERATION

To insert DISC / USB

• To play files on a disc, insert a disc with the label surface facing upward

into the disc slot. Playback will begin automatically.

• To play files in a USB device, open the USB port cover, then insert a USB device into the USB port.

Playback will begin automatically.

Eject Disc/USB

• To eject a disc, press the (eject) button to eject the disc and then remove it.

• Remove the USB device to eject a USB device.

Play/Pause

Press the (play/pause) button to pause or resume playback.

Next/Previous Track

To play the next track, press the button; To play the previous track, press the button.

Fast Forward/Backward

To fast forward, press and hold the button; To fast backward, press and hold the button.

Introduction Scan

Press the INT button to play the first 10 seconds of each track, press again to stop the introduction scan,

and play the current track.

Repeating the same track

Press the RPT button to toggle between RPT 1 (Continuously repeats current track), RPT DIR

(Continuously repeats all tracks in current folder), RPT ALL (Play all track),and RPT OFF.

Playing all tracks in random

Press the RDM button to play all tracks in random order, press again to cancel this function.

Track/Folder Navigation

• During a disc, USB mode, press the 5/-10 button to go backward 10 tracks.

Press the 6/+10 button to jump forward 10 tracks.

• During an MP3 disc, USB mode, press and hold the 5/-10 button to go back the previous folder.

Press and hold the 6/+10 button to go to the next folder.

You can repeat this function depending on the number and level of folders.

• These buttons have no this function if the USB device has no folders.

>>|

|<<