User Manual

5
GENERAL OPERATION
Turn Unit On/Off
• Press any button on the front panel or on the remote control to turn on the unit.
• Press and hold the power ( ) button on the front panel or briefly press the power ( ) button on the
remote control to turn the unit on or off.
Adjust Volume (VOL)
Rotate the VOL knob on the front panel or press the VOL /VOL button on the remote
control to increase or decrease the volume level.
Push-To-Talk
Press the button (VOL knob) to access to smartphones voice assistant capability via Bluetooth.
Adjust Menu Options (SEL)
• Press the and hold the SEL button on the front panel or on the remote control repeatedly to enter into
the setting menu, then press the SEL button repeatedly to select setting items, rotate the VOL knob to
change values: BASS, TREBLE, BALANCE, FADER, LOUD ON/OFF, EQ OFF / FLAT / CLASSIC / POP
/ ROCK / JAZZ, DX / LOCAL, STEREO/MONO, VOL LAST / ADJ, AREA US/EU, CLOCK 12/24,
BEEP ON/OFF, VOLUME.
- BASS/TREBLE:-7, -6, ~, -1, 0, +1, ~, +6, +7
- BALANCE:L7, L6, ~, L1, 0, R1, ~, R6, R7
- FADER:R7, R6, ~, R1, 0, F1, ~ , F6, F7
- Loudness: LOUD ON/OFF
- EQ(Equalizer) Setting: OFF, FLAT, CLASSIC, POP, ROCK, JAZZ
- DX/LOCAL: Enables or disables the local broadcast mode (LOCAL).
- Stereo/Mono: Switches between MONO and STEREO reception mode for radio frequencies.
- VOL(LAS/ADJ):This option allows user to preset a volume level as the power-on memory volume
level.
- VOL LAST: In this mode,the unit switches on at the actual volume it had when it was last
switched off.
- VOL ADJ: In this mode, the unit power on at the actual volume that you preseted constant
switch-on volume level.
Press the SEL button to enter the constant switch-on volume adjusting mode and the “A-VOL XX”
will be shown on the LCD display.
Then you can adjust a constant switch-on volume level by rotating the VOL knob.
- AREA US/EU: This car radio is equipped the USA / Europe frequency.
Rotate the volume knob to switch between USA and europe frequency.
The system will change the frequecny setting in about 3 seconds.
- CLOCK 12/24:
This unit is equipped with two types of clock display formats, 12 and 24 hours.
Rotate the volume knob to choose 12 hours format or 24 hours format.
- BEEP ON/OFF:Enables or disables the “BEEP” signal to confirm use.
- VOLUME Level: 0~40
• Rotate the VOL knob on the front panel or press the VOL /VOL button on the remote control
to change values.
Set the Clock (CLK)
1. To display clock time, press and hold the CLK button on the front panel or press the CLK button
on the remote control.