User's Manual
TRAINING
THE TRAINING PARAMETER
The TRAINING parameter is used to select
Training mode. In Training mode the Ego10
will function exactly the same as normal but
with two important dierences:
1. The solenoid valve is not driven so the
bolt does not move and does not release a
burst of air. Instead the beeper will sound
for each pull of the trigger. This simulates
the ring cycle without wasting air and generating lots of
noise.
2. The BBSS is overridden so that the Ego10 can cycle
without paint. The centre of the BBSS indicator changes to
a ‘T’ to indicate that Training mode is enabled.
The TRAINING parameter choices are as follows:
> OFF:
Training mode is disabled and the Ego10 functions
normally.
> ON:
Training mode is enabled.
> CANCEL:
Cancel editing and leave the parameter
unchanged.
CLOCK
THE CLOCK MENU SELECTED MODELS ONLY
The CLOCK menu allows the time and date on the Ego10’s
internal clock to be adjusted.
TIME
THE TIME PARAMETER
The TIME parameter allows for adjustment
of the 24hr clock.
DATE
THE DATE PARAMETER
The DATE parameter allows for adjustment
of the day, month and year.
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR EGO10
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
INDEX
45.
ADVANCED SET-UP
ADVANCED SET-UP
QUICK GUIDE