User's Manual

FULL
THE BREECH FULL TIME PARAMETER
Tumbling paintballs can take time to
settle in the breech before they can be
successfully fired. This parameter is
used to set the amount of time that
a paintball has to be in the breech
before the Ego11 is allowed to fire. This
parameter can be set between 1.0 and
20 milliseconds in 0.5ms increments.
PULL TM
THE TRIGGER PULL TIME PARAMETER
The PULL TM parameter is used to
set the minimum amount of time that
the Trigger must be pulled before it is
recognised as a valid trigger pull. This
parameter can be set between 3.0 and
20.0 milliseconds in 0.5 increments.
RELEASE TM
THE TRIGGER RELEASE TIME PARAMETER
The RELEASE TM parameter is used to
set the minimum amount of time that
the Trigger must be released before it
is recognised as a valid trigger release.
This parameter can be set between 3.0
and 25.0 milliseconds in 0.1 millisecond
increments.
PULL PT
THE TRIGGER PULL POINT PARAMETER
The PULL PT parameter is only available
if
OPTO has been selected in the
HARDWARE menu. PULL PT defines the
point at which the Trigger is considered
pulled and is adjustable between 51%
and 99% in 1% increments.
RELEASE PT
THE TRIGGER RELEASE POINT PARAMETER
The RELEASE PT parameter is only
available if OPTO has been selected
in the HARDWARE menu. RELEASE PT
defines the point at which the Trigger is
considered released and is adjustable
between 1% and 49% in 1% increments.
BASIC TRIGGER
FILTER SET-UP
95% of Trigger bounce problems can be eliminated by
utilizing one of the nine fixed DEBOUNCE
choices
(LEVEL 1-9). In attempting to eliminate Trigger bounce
it is advisable to try the nine fixed DEBOUNCE
choices
before attempting any advanced set up of the Trigger
filters.
42.
ADVANCED SET-UP