Manual

To access the Main menu from the run screen double-click the

button and the first

item on the Main menu will be displayed. Alternatively, push and hold the

button for 2

seconds.

Some of the parameters in the menu system can have a tournament lock applied to

them. This lock can be toggled on and off by pressing the tournament lock button on

the circuit board

(SEE

IN FIGURE 14A)

When trying to select a parameter that is locked, the a ‘LOCKED’ message will be briefly

displayed.

When the displayed item is a parameter, as indicated by a parameter value on the right of the screen, pressing the

button will activate the EDIT mode which allows the parameter value to be altered. When EDIT mode is active, the

black box surrounding the parameter name disappears. There are two types of parameter, numeric parameters and

choice parameters.

A numeric parameter has a numeric value whereas a choice parameter is one that has a small number of distinct

choices. Altering parameter values is essentially the same for both types of parameter. To alter a numeric parameter,

first activate the EDIT mode. Press the button to increase the parameter value one step at a time. Press and

hold the button to increase the parameter value rapidly. When the value reaches it’s maximum it will revert to

its minimum value. Press the button to decrease the parameter value one step at a time. Press and hold the

button to decrease the parameter value rapidly. When the value reaches its minimum it will revert to it’s maximum

value. When the required parameter value is displayed press the button to accept the value and end the EDIT mode.

To alter a choice parameter, first activate the EDIT mode. Press the button to display the next choice in the list. When the

last choice is displayed, pressing will display the first choice in the list. Press the button to display the previous choice

in the list. When the first choice is displayed, pressing the button will display the last choice in the list. When the required

choice is displayed press the button to accept the choice and end the EDIT mode. If the displayed choice is CANCEL then

pressing the button will end the EDIT mode and restore the parameter to the value that is was prior to editing.

Press and release the

button to display the next item on the menu. When the last menu item is displayed, pressing the

button will display the first item.

Press and release the

button to display the previous item on the menu. When the first menu item is displayed, pressing the

button will display the last item.

When the displayed item is a branch, as indicated by an animation on the right of the screen, press the

button to move to

another menu.

ACCESSiNG THE MENU SYSTEM

MOViNG AROUND THE MENUS

ALTERiNG PARAMETERS

THE MARKER CAN BE FIRED WHILE NAVIGATING ALL MENUS AND PARAMETERS.

WARNING

FIG 14A

ADVANCED SETUP 27