Manual
This parameter allows the user to toggle the gauge graphic on and off in the shot counter Run Screen. The choices
for the
GAUGE
parameter are:
> OFF: Gauge graphic on the shot counter run screen is disabled.
> ON: Gauge graphic on the shot counter run screen is enabled.
> CANCEL: Cancel editing and leave the parameter unchanged.
The
GAUGE MAX
parameter allows the user to set the number the gauge counts down from every time the Ego LV1
is fired. The user can set the gauge from 100 to 2000 in increments of 10.
In training mode the LV1 simulates the firing cycle so that the user may practice pulling the trigger without wasting
air and making lots of noise. The BBSS is overridden in order to simulate paintballs entering the breech and the
beeper indicates when a shot is fired. Training mode is indicated with a âTâ in the BBSS indicator.
> OFF: Training mode is disabled and the Ego LV1 functions normally.
> ON: Training mode is enabled.
> CANCEL: Cancel editing and leave the parameter unchanged.
This menu is comprised of parameters that control the shot counter.
GAUGE
PARAMETER
GAUGE MAX
PARAMETER*
TRAiNiNG
PARAMETER
SHOT COUNT
MENU
40 ADVANCED SETUP