Manual

Ensure the LPR assembly is still correctly in place in the body
(SEE FIGURE 25M) .
Make sure the exhaust hole in the valve guide is pointed
directly upwards and the lip on the valve plug is pointed
downwards (SEE FIGURE 25N) . Then slide the entire valve
guide, exhaust valve, valve stem and valve plug into the body.
Ensure the valve guide is fully inserted into the LV1 body.
P ush and hold the valve plug firmly up to the LV1 body (SEE
FIGURE 25O) , take the tuning fork and insert it into the FRM
positioning the forks either side the LPR body. Push the fork up into
the body until the tips of the fork stop against the inside of the
body and the base of the tuning fork is flush with the threads on the
FRM (SEE FIGURE 25P) .
You have now successfully stripped and cleaned your Ego LV1
valve assembly. See page 45 on how to attach the SL4 inline
regulator.
IF YOU ARE UNSURE ABOUT PERFORMING A MAINTENANCE
PROCEDURE PLEASE CONTACT YOUR NEAREST SERVICE
CENTRE.
WARNING
(CONTiNUED)
FIG 25M
FIG 25O
FIG 25N
FIG 25P
58 MAiNTENANCE