Manual

To switch on the Ego LV1 press the button twice in quick
succession, referred to elsewhere in this manual as ‘double-
clicking’. The Ego LV1 can also be switched on by pushing
and holding the button (SEE FIGURE 3A) .
1
Press and hold the button (SEE FIGURE 3A) until the display
shows TURN OFF. Release the button and re-press it to
turn off the Ego LV1. Alternatively double click the button
to enter the menu tree then press to turn off the Ego LV1.
1
Pull the trigger (LABELLED
A
IN FIGURE 3B) to fire the Ego
LV1. The entire firing sequence is controlled electronically by
the Ego LV1 circuit board, enabling any user to easily achieve
high rates of fire.
1
The double clicking feature is user selectable, factory default is set to on. It
can be turned off using the Double Click parameter in the Hardware menu (see
page 39).
SWiTCHiNG ON THE
EGO LV1
SWiTCHiNG OFF THE
EGO LV1
FiRiNG THE EGO LV1
FIG 3A
FIG 3B
A
8 USiNG THE EGO LV1