User's Manual

USING THE
DISPLAY MENU
As both the TIMER and the SHOTS options from the
DISPLAY Menu are covered in their respective sections in
the following pages we will start by looking at the Rate of
Fire options.
THE AVERAGE
RATE OF FIRE OPTION
The Average Rate of Fire (AVG ROF) option is one of two
ways in which you can monitor your rate of re whilst using
the Eclipse Ego7. The Average Rate of Fire screen looks like
the screen to the left.
Unlike some other markers the Average Rate of Fire on the
Eclipse Ego7 is measured over a period of one second.
The current Average Rate of Fire is displayed in the top right
hand corner of the display, whilst the maximum Average
Rate of Fire is displayed in the bottom right hand corner of
the display.
To reset the maximum Average Rate of Fire simply push and
hold the button for a one second period.
With the Break-Beam Sensor System enabled and paint
present, the Average Rate of Fire is only limited by the
speed of your loader. To achieve the highest rates of re we
recommend using a high speed loader such as the Reloader
B2, Pulse or Velocity Loader. With the Break-Beam Sensor
System enabled and no paint present, the rate of re will be
0 as your Ego7 will be unable to re.
To use the Average Rate of Fire screen without shooting
paint, simply switch the Break-Beam Sensor System off
using the button. In this scenario the Average Rate of Fire
is only limited to whatever value you have selected in the
OFF ROF option in the TIMING Menu.






















