User's Manual

OFF ROF
The OFF ROF parameter is used to control how fast the
Ego7 cycles when the Break-Beam Sensor System is
disabled. This parameter should be set to match the slowest
speed of the loading system in use.
Scroll through the
TIMING Menu until the OFF ROF
parameter is displayed.
The current value of the MAXIMUM RATE OF FIRE (with
BBSS off) is shown in balls per second on the right hand
side of the display. Press the
button to enter the edit function
see left.
Press and release the button to
increase the OFF ROF value in 0.1
ball per second increments, up to
a maximum of 15 bps. Press and
hold the button to increase the
OFF ROF value more rapidly.
Press and release the button
to decrease the OFF ROF value
in 0.1 ball per second increments,
down to a minimum of 1 bps.
Press and hold the button to
decrease the OFF ROF value
more rapidly.
Press to save the OFF ROF
value and the edit indicators will
disappear from the display to
indicate that the value has been
accepted.
You have now returned to the
SET-UP Menu.
THE RAMPSET MENU
The RAMPSET Menu provides access to parameters that
are used to dene the characteristics of the ramping mode
of re that has been selected.
To locate and enter the RAMPSET menu scroll the SET-UP
Menu until RAMPSET is displayed and then press
the button. This will display TYPE, the rst option on the
RAMP SET Menu as shown below:
Press the button to scroll down through each of the
items on the RAMP SET Menu. Once the last item has been
displayed, pressing the button will cause the rst item to
be displayed.
Press the button to scroll up through each of the items
on the RAMP SET Menu. Once the last item has been
displayed, pressing the button will cause the rst item to
be displayed.
Press the to edit the displayed parameter.
Selecting
BACK will return the display to the SET-UP Menu.
