User's Manual

CLEANING AND

LUBRICATING THE

BOLT

This procedure can be performed with the Ego8 gassed up as

well as de-gassed.

Raise the bolt pin and remove the bolt and bolt pin from the

Ego8 marker body.

Using a dry cotton bud remove any paint or grease from the

surface of the bolt (SEE FIGURE 16.1).

Lubricate the bolt and replace the bolt, locking the bolt pin into

the designated slot in the rammer.

NOTE: WE RECOMMEND THE USE OF ECLIPSE PAINTBALL GUN OIL

ON THE EGO8 RAMMER AND BOLT.

FIG 16.1

CONTENTS

ORIENTATION

QUICK SET-UP

USING YOUR EGO8

ADVANCED SET-UP

MENU TREE

MAINTENANCE

FAULT FINDING

SERVICE CENTERS

PARTS LIST

SPARES & ACCESSORIES

63.

MAINTENANCE

QUICK GUIDE