Manual

FIG-1
FIG-2
C
A
B
D
08
EMEK
FIG-1
The safety switch
A
is located on the left side of the Emek frame and is
used to switch between SAFE (S) and FIRE (F).
Enabling SAFE (S):
Rotate the safety switch
A
counter-clockwise until the S indicator
B
is revealed and the switch arrow points towards S. The trigger is now
locked.
FIG-2
SAFE (S) is also represented on the right side of the frame by the switch
arrow
C
pointing towards the S indicator
D
.
Firing the EMEK
When the safety switch points towards S the marker is still live (if tted
with an air system), but the trigger is locked and cannot be pulled.
QUICK START
THE EMEK SAFETY
SWITCH - SAFE (S)
WARNING!
When SAFE (S) is enabled the Emek is still a live marker until the air system has
been fully removed.
Ensure that a barrel blocking device is always attached when the marker is set
to SAFE (S).
WARNING