Manual

VISIT WWW.PLANETECLIPSE.COM

USING YOUR ETEK2

T-SLOT MOUNTING SYSTEM

The current industry standard Dovetail rail that is used to connect the

ASA to the frame has consistently proved to be the weakest link for

every manufacturer out there when it comes to the durability of the

system used to mount the tanks to the guns. For that reason we have

shunned the flawed design of the dovetail in favour of a new T-Slot

design. By using a T-shaped slide rail, as opposed to the double V of the

old fashioned dovetail, the ASA-To-Frame interface has been drastically

strengthened. There should be no way that a well executed dive into a

bunker should dislodge the ASA now, but even if you feel you have to

go and use a different ASA there are still standard mounting holes in the

frame to fit your own inferior rail and ASA.

MACROLINE HOSING AND ELBOWS

To aid the longevity of your Macroline hosing, it is very important to

remove it from (and install it back into) the fittings in the correct manner:

Pull back the collet section of the Macroline fitting and keep the collet

depressed.

Pull the Macroline hose out of the Macroline fitting and release the collet.

Before installing the Macroline hose into the Macroline fitting ensure that

the end has been trimmed correctly to ensure a tight fit in the fitting.

WARNING: IF YOU EVER REMOVE THE MACROLINE HOSE

FROM THE FITTING, ALWAYS CHECK THE CONDITION OF YOUR

MACROLINE HOSING AND IF IT IS WORN OR THE WRONG LENGTH

REPLACE IT IMMEDIATELY.

T-SLOT MOUNT