Manual

VISIT WWW.PLANETECLIPSE.COM
WARNING
2
VISIT WWW.PLANETECLIPSE.COM
Warnings for safe Etek2 handling:
• The Etek2 is not a toy.
• Careless or improper use, including failure to follow
instructions and warnings within this User Manual and
attached to the Etek2 could cause death or serious injury.
• Do not remove or deface any warnings attached to the Etek2.
• Paintball industry standard eye/face/ear and head protection
designed specifically to stop paintballs and meeting ASTM
standard F1776 (USA) or CE standard (Europe) must be worn
by user and any person within range.
• Persons under 18 years of age must have adult supervision
when using or handling the Etek2.
• Observe all local and national laws, regulations and guidelines.
• Use only professional paintball fields where codes of safety are
strictly enforced.
• Use compressed air/nitrogen only. Do not use Co2
• Always follow instructions, warnings and guidelines given with
any first stage regulator you use with the Etek2.
• Use 0.68 calibre paintballs only.
• Keep the Etek2 switched off until ready to shoot.
• Treat every marker as if it is loaded.
• Never point the Etek2 at anything you do not intend to
shoot.
• Do not shoot at persons at close range.
• Always measure your markers velocity before playing
paintball, using a suitable chronograph.
• Never shoot at velocities in excess of 300 feet (91.44 meters)
per second, or at velocities greater than local or national laws
allow.
• Do not fire the Etek2 without the bolt in the breech, as
high-pressure gas will be emitted.
• Do not fire the Etek2 without the bolt pin locked securely in
place.
• Never look into the barrel or breech area of the Etek2 whilst
the marker is switched on and able to fire.
• Never put your finger or any foreign objects into the paintball
feed tube of the Etek2.
• Never allow pressurised gas to come into contact with any
part of your body.
• Always switch off the Etek2 when not in use.
• Always fit a barrel-blocking device to the Etek2 when not in
use on the field of play.
• Always remove all paintballs from the Etek2 when not in
use on the field of play.
• Always remove the first stage regulator and relieve all residual
gas pressure from the Etek2 before disassembly.
WARNING:
ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES.