Manual

VISIT WWW.PLANETECLIPSE.COM

MAINTENANCE

Remembering to include the valve spring, begin to insert the rammer

assembly into the Etek2 body. By applying slight pressure to the back of

the rammer assembly hold the rammer in place against the exhaust valve

spring tension, so that the valve plug can be replaced (SEE FIGURE 5.49).

Attach low-pressure hosing to the barb at the back of the FRM (SEE FIGURE

5.50).

NOTE: DO-NOT OVERTIGHTEN THE VALVE PLUG SCREW.

FIG 5.49

FIG 5.50