Manual

THE ACTUAL RATE
OF FIRE
When the ACTUAL ROF is selected for
display the Run Screen will look something
like the screen to the right. The value
displayed in the top left of the screen
represents the number of full cycles
completed in the last second - the actual
rate of re over the second. The number
below it is the maximum actual rate of
re that has been recorded. To reset this
maximum, press and hold the button
for 0.5 seconds.
THE PEAK RATE OF
FIRE
When the PEAK ROF is selected for display
the Run Screen will look something like the
screen to the left, which diers from the
display of the ACTUAL ROF by the inclusion
of the indicator ‘PK’. The value displayed
in the top left of the screen represents
the rate of re measured between the
last two shots. The number below it is the
maximum peak rate of re that has been
recorded. To reset this maximum, press and
hold the button for 0.5 seconds.
The PEAK ROF is typically higher than the
ACTUAL ROF as it is much easier to re two shots in quick
succession than it is to maintain a string over a longer
period of time.
THE MENU SYSTEM
Behind the Run Screen is a structured menu system
comprised of multiple levels of menus. Each menu contains
a number of menu items and each menu item can either
be an editable parameter or a branch to another menu.
Branches always have an animated graphic whereas
parameters indicate their current value.
The menu structure is shown in the following pages.
The menus are ‘smart menus’ in that they will expand and
contract depending upon the state of certain parameters.
For example, the MAX ROF parameter is only visible when
the ROF CAP parameter is set to ‘on’. Smart menu items are
indicated with a * in the table opposite.
TYPICAL
BRANCH
TYPICAL
PARAMETER
36.
EMORTAL BOARD
36.
EMORTAL BOARD