Manual

ACCESSING THE MENU
SYSTEM
To access the Main Menu from the Run Screen push and
hold the button for 2 seconds.
To access the Set-up Menu from either the Run Screen or
the Main Menu push the internal Setup button and the rst
item on the Set-up Menu will be displayed.
1
MOVING AROUND THE
MENUS
Press and release the button to display the next item on
the menu. When the last menu item is displayed, pressing
the button will display the rst item.
Press and release the button to display the previous
item on the menu. When the rst menu item is displayed,
pressing the button will display the last item.
When the displayed item is a branch, as indicated by an
animation on the right of the screen, press the button
to move to another menu.
1
If the tournament lock is set to ‘o’ then the Main Menu and
Set-up Menu are joined together which means that they can
be accessed in either of the two ways above.
ALTERING PARAMETERS
When the displayed item is a parameter, as indicated by
a parameter value on the right of the screen, pressing
the button will activate the EDIT mode which allows the
parameter value to be altered. When EDIT mode is active,
edit indicators appear on the left of the screen as
shown in the screen below.
There are two types of parameter, numeric
parameters and choice parameters.
A numeric parameter has a value which is a
number whereas a choice parameter is one that
has a small number of distinct choices. Altering
parameter values is essentially the same for both
types of parameter.
To alter a numeric parameter, rst activate the EDIT mode.
Press the button to increase the parameter value one
step at a time. Press and hold the button to increase
the parameter value rapidly. When the value reaches it’s
maximum it will revert to it’s minimum value. Press the
button to decrease the parameter value one step at a time.
Press and hold the button to decrease the parameter
value rapidly. When the value reaches it’s minimum it will
revert to it’s maximum value. When the required parameter
value it displayed press the button to accept the value
and end the EDIT mode.
To alter a choice parameter, rst activate the EDIT mode.
Press the button to display the next choice in the list.
When the last choice is displayed, pressing will display
the rst choice in the list. Press the button to display
the previous choice in the list. When the rst choice is
displayed, pressing the button will display the last
choice in the list. When the required choice is displayed
press the button to accept the choice and end the EDIT
mode. If the displayed choice is Cancel then pressing the
button will end the EDIT mode and restore the parameter
to the value that is was prior to editing.
EDIT INDICATORS
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR ETEK3
ADVANCED SET-UP
EMORTAL BOARD
MAINTENANCE
UPGRADING
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
INDEX
41.
EMORTAL BOARD
EMORTAL BOARD
QUICK GUIDE