Manual

THE ETEK4 NAVIGATION
CONSOLE
The Etek4 utilises multi coloured LEDs to display all
of the information that the user requires via the Etek4
navigation console.
Each area of the navigation console is used to
perform different functions and display different
information as outlined below:
The Select button
is used to:
- Switch the Etek4 on and off.
- Switch the BBSS (eye system) on and off.
- To scroll through parameters and edit parameters.
The “E” on the navigation console is used to:
- Display the status of the BBSS (eye system).
- Display the value of a parameter in tens (10 - 90)
The “G” on the navigation console is used to:
- Display the value of a parameter in units (0 - 9)
- Display the status of the battery.
The “O” on the navigation console is used to:
- Display the value of a parameter in tenths (0.0 - 0.9)
As a combined unit the “E”, “G” and “O” are also used
to:
- Display power up and power down status.
- Display tournament lock status.
- Display that factory settings have been restored
- To confirm whether a parameter value has been
accepted or rejected.
SELECT
bUTTON
ETEK AmETEK LT
18.
ORIENTATION