Manual
PLEASE READ AND UNDERSTAND ALL 
INSTRUCTION MANUALS BEFORE USE. 
The Eclipse Etek4 is not a toy. PAINTBALL SAFETY 
RULES MUST BE FOLLOWED AT ALL TIMES. 
Careless or improper use, including failure to follow 
instructions and warn
ings within this User Manual 
and attached to the Etek4 could cause deat
h or 
serious injury. 
Do not remove or deface any warnings attached to 
the Etek4. 
Paintball industry standard eye/face/ear and head 
protection designed specifically to stop paintballs 
and meeting ASTM standard F1776 (USA) or CE 
standard (Europe) must be worn by the user and 
any person within range. Proper protection must be 
worn during assembly, cleaning and maintenance. 
Hearing protection should be worn. 
Never shoot at a person who is not wearing proper 
protection. 
Never look directly into the barrel of the marker. 
Accidental discharge into the eyes may cause 
permanent injury or death. Never look into the 
barrel or breech area of  the Etek4 whilst the marker 
is switched on and able to fire. 
Keep the Etek4 switched off  until ready to shoot. 
Treat every marker as if  it is loaded and ready to 
fire. 
The electronic on/off  is the markers safety, always 
switch off  the marker when not in use. 
Always fit a barrel-blocking device to the Etek4 when 
not in use. 
Always remove all paintballs from the Etek4 when 
not in use on the field of  play. 
Never point the Etek4 at anything you do not intend 
to shoot. 
Do not shoot at persons within close range. 
Do not field strip or remove any parts while the 
marker is pressurised. 
Do not pressurise the Etek4 without the bolt system 
correctly installed, as high-pressure gas will be 
emitted.
Do not fire the Etek4 without the bolt system 
correctly installed. 
Never put your finger or any foreign objects into the 
paintball feed tube of  the Etek4. 
Never allow pressurised gas to come into contact 
with any part of  your body. 
Always remove the first stage regulator and relieve 
all residual gas pressure from the Etek4 before 
disassembly. 
Always remove the first stage regulator and relieve 
all residual gas pressure from the Etek4 for 
transport and storage. 
ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY 
INSTRUCTIONS AND GUIDELINES!
01.
02.
03.
04.
05.
06.
07.
08.
09.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
WARNING
2.
WARNING










