Manual

RAMP KICK-IN RATE
(RAMP ONLY)
The RAMP KICK-IN RATE parameter
sets the rate at which the trigger
has to be pulled in order to start
and maintain ramping.
The RAMP KICK-IN RATE parameter
is indicated by a white light on the
navigation console when you are in
the Set Up Mode.
This parameter can be set between 5.0 and 10.0 pulls
per second in 0.1 pps increments.
RAMP RESTART
TIME
(RAMP ONLY)
The Ramp Restart Time parameter
sets the time during which ramping
can be restarted with a single
trigger pull, after the previous
ramping string has stopped.
The parameter is specified in
seconds and if set to 0.0 then
ramping can only be restarted with four shots at the
Ramp Kick-in Rate. The Ramp Restart Time parameter
is indicated by a dark red light on the navigation
console when you are in the Set Up Mode.
This parameter is fully adjustable between 0.0 and
1.0 seconds.
SET UP PARAMETERS TABLE
The following table lists the set up parameters
required for compliance with the 2011 rules for the
major paintball leagues. For your convenience there
is space to add settings for additional leagues and
future rules changes.
These parameters are correct at time of printing and are only to be
treated as a guide.
It is the users responsibility to ensure that the marker complies with
the rules of the field, site and/or tournament where it is being used.
MILLENNIUM
NPPL
PSP
Fire Mode
Max ROF/
BBSS On
Max ROF/
BBSS Off
Ramp Kick-in
Rate
Ramp Restart
Time
3.0
10.0
10.0
5.0
0.0
3.0
12.2 15.0
10.0
n/a
n/a
10.0
5.0
1.0
1.0
Fire Mode
Max ROF/
BBSS On
Max ROF/
BBSS Off
Ramp Kick-in
Rate
Ramp Restart
Time
CONTENTS
ORIENTATION
QUICK SET-UP
USING THE ETEK4
ADVANCED SET-UP
EMORTAL BOARD
MAINTENANCE
UPGRADING
FAULT FINDING
SERVICE CENTRES
PARTS LIST
SPARES
INDEX
33.
ADVANCED SET-UP
QUICK GUIDE