Manual

THE SETUP MENU
This menu is the starting point for access to all of
the parameters that control the way that the Etek4
operates. To access this menu, first turn on the Etek4
and then remove the 3 screws holding the right hand
cheek of the rubber grips
(SEE FIGURE 15A).
Peeling back the cheek will reveal a red Setup button
on the circuit board
(SEE
A
IN FIGURE 15B),
push and hold this button for 2 seconds.
If the tournament lock (LOCK) is off then this menu is
joined to the end of the Main Menu and can therefore
be accessed without tools.
F IG 15 A
F IG 15 b
A
46.
EmORTAL bOARD