Manual

SAVE
THE SAVE PRESET PARAMETER
This parameter is used to save the
current set of parameters as a user
defined custom Preset configuration. This
parameter has the following choices:-
> USER 1: Save the current parameters
as the preset ‘USER 1’.
> USER 2: Save the current parameters
as the preset ‘USER 2’.
> CANCEL: Editing is cancelled and the
parameter remains unchanged.
With the exception of FACTORY each of the Presets
changes only those parameters that control the
firing mode of the Etek4, leaving Filter and Timing
unchanged.
MODE
THE FIRING MODE PARAMETER
This parameter is used to select the firing
mode of the Etek4 and has the following
choices:
> SEMI:
This is the default and in this
firing mode the Etek4 will fire one shot for
every trigger pull.
> RAMP: In this firing mode, the rate of
fire is increased above the rate at which
the trigger is pulled once certain criteria
have been met. These criteria are set by
the parameters on the Ramp Set Menu.
1
> CANCEL: Editing is cancelled and the parameter is
unchanged.
1
Certain modes may only be available in certain countries and on
certain models of the Etek4.
48.
EmORTAL bOARD