Manual

inStALLinG A preSet Air
SYSteM
MAKE SURE THE MARKER IS TURNED OFF WITH A
BARREL BLOCKING DEVICE INSTALLED AND THAT
NO PAINTBALLS ARE IN THE MARKER OR LOADER
BEFORE INSTALLING AN AIR SYSTEM.
COMPRESSED AIR AND NITROGEN SYSTEMS CAN
BE EXTREMELY DANGEROUS IF
HANDLED OR USED INCORRECTLY.
ONLY USE A AIR SYSTEM CERTIFIED FOR USE
WITHIN THE COUNTRY OF USE
THE ETHA CANNOT BE USED WITH CO2. ONLY USE
COMPRESSED AIR OR NITROGEN.
NEVER ADD ANY LUBRICANTS OR GREASES
INTO THE FILL ADAPTER OF THE AIR SYSTEM
REGULATOR
ENSURE THAT ALL SCREWS ARE TIGHTENED AND
NO PARTS ARE LOOSE BEFORE INSTALLING AN AIR
SYSTEM
DO NOT PRESSURISE THE ETHA WITHOUT THE
BOLT SYSTEM CORRECTLY INSTALLED, AS HIGH
PRESSURE GAS WILL BE
EMITTED.
DO NOT INSTALL A COMPRESSED AIR SYSTEM
OR LOAD PAINTBALLS INTO THE ETHA UNTIL
YOU FEEL COMPLETELY CONFIDENT WITH YOUR
ABILITY TO HANDLE THE MARKER SAFELY AND
RESPONSIBLY.
ALWAYS RELIEVE ALL RESIDUAL GAS PRESSURE
FROM THE ETHA BEFORE UNSCREWING THE
PRESET AIR SYSTEM.
uSING THE ETHA
22